BUCIER SATA-III Cable 1M 4-Pack Right-Angle 6Gbps
A four-pack of one-metre SATA III data cables with straight-to-90-degree connectors, 6 Gbps speed and nylon braiding for tidy routing
- Rated speed6 GB/s
- Conductor typeNylon
- Product typeSATA Cables
- Product colorBlack/Blue
- Overall length3.3
- Key featuresData Transfer
- 6 Gbps transfer speed backed by SATA III specification
- 1 metre length gives 3.3 feet of reach for server chassis
- 90-degree right-angle connector eases routing in tight spaces
- Nylon braided 30 AWG conductors reduce clutter for clean cable management
- Four labelled cables in one pack simplify RAID and multi-drive setups
Right-Angle SATA-III 4-Pack
This set contains four SATA-III data cables, each 1 metre (3.3 ft) long, with a straight connector on one end and a 90-degree right-angle connector on the other. They link SATA 7-pin drives such as SSDs, HDDs, optical drives or RAID controllers to a motherboard or host controller. The cables carry data only and do not supply power.
Thin Braided Build for Airflow
Each cable uses 30 AWG conductors wrapped in a nylon braid that keeps the four leads tidy in tight server or workstation chassis. The slim profile reduces obstruction to airflow compared with standard moulded cables. Rated for 6 Gbps transfer, actual throughput depends on the attached drive and controller. Backwards compatible with SATA I and SATA II devices.
Labeled Leads Simplify RAID Wiring
Connectors P1 through P4 are marked for quick identification when routing multiple drives in a RAID array or multi-bay enclosure. Locking latches on every plug secure the connection against vibration in rack-mounted gear. Buyers who need internal power cables or external eSATA brackets will not find them in this pack.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $15.99
- Pricier than about 60% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | ADCAUDX |
| Model name | SATA-011 |
| Product type | SATA Cables |
| Product color | Black/Blue |
| Performance | |
| Rated speed | 6 GB/s |
| Size & build | |
| Conductor type | Nylon |
Questions about this item
How do I install the 90-degree SATA connectors and which step do people get wrong?
Connect the straight end to the motherboard or controller and the right-angle end to the drive, ensuring each locking latch clicks into the 7-pin port; the common mistake is forcing the angled plug without aligning the latch, which can bend the pins.
What maintenance or replacement will these cables need later?
The nylon-braided 30 AWG conductors are passive and require no scheduled maintenance; replace a cable only if the latch breaks, the braid frays, or data errors appear after reseating both ends.
What limit shows up first under sustained use?
The practical throughput ceiling is the 6 Gbps SATA III rating of the cable assembly, so sustained transfers cannot exceed that bandwidth regardless of the attached drive or controller speed.
More in SATA & eSATA Drive Cables
Similar items
STARTECH SLSATAADAP6 6-Inch Slimline SATA to SATA Adapter
- 6 in (15.2 cm)
- Others
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
Longdex SATA22PEC-50CM-4 SATA 22-pin female to 7+15-pin male combo extension cable 50cm 4-pack
- Sata, Sata
- SATA
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
ADCAUDX SATA-005 6pcs SATA III 1m 6Gbps Braided Cable Set
- 6 GB/s
- SATA Cables





