BUCIER SATA III Cable 90° Right Angle 3-Pack 50cm White
Three SATA III cables with 90-degree locking connectors for secure 6 Gbps drive connections
- Product colorWhite
- Right-angle connectors fit tight spaces
- 6 Gbps SATA III speed for fast transfers
- Locking latches keep cables secure under vibration
- Three cables in one pack for RAID or spares
- 50 cm length suits most internal builds
Three-pack SATA III cables
This three-pack supplies three SATA III data cables for connecting internal hard drives, SSDs or optical drives to a motherboard or host controller. Each cable measures 50 cm and carries a white jacket for easy identification inside a build. The pack suits builders adding multiple drives or configuring a RAID array who want matching cables in one purchase.
90-degree right-angle connectors
The right-angle plug bends 90 degrees from the straight end, letting the cable sit close to the drive or board where a straight connector would foul a side panel or adjacent card. Locking latches on both ends click into the SATA ports to resist vibration or accidental tugs. The design replaces a standard straight cable when clearance behind the drive is tight and a secure lock is preferred over a friction fit.
Sustained 6 Gbps transfer
Rated to the SATA 3.0 specification, each cable supports up to 6 Gbps and remains backward compatible with SATA I and SATA II devices. Shielded tinned-copper conductors with aluminium foil wrap reduce external interference so the link holds its rated throughput during long copy jobs rather than only in brief bursts. Actual sustained speed will still be limited by the connected drive and controller.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $16.99
- Pricier than about 63% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Product color | White |
Questions about this item
How much clearance does the 90° right-angle connector need behind a drive?
The 90° right-angle connector extends about 18 inches (50 cm) from the drive port, so allow at least that depth behind the device for the cable run.
Which way round do the straight and right-angle ends go when installing the cable?
Each end has a straight connector with a locking latch; plug the right-angle end into the drive and the straight end into the motherboard, then press until the latches click.
When should I replace one of the three cables in the pack?
Replace a cable if the latch no longer clicks, the connector feels loose, or you see bent pins or frayed shielding on the 50 cm length.
More in SATA & eSATA Drive Cables
Similar items
STARTECH SATRD30CM 30cm SATA cable latching 6Gbps
- 11.81 in (30 cm)
- SATA III
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
Transway's Marketplace DT-5025D USB 2.0 to SATA 2.5" cable .5 ft
- Usb2.0 to sata and…
- Clear Blue
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors





