BUCIER SFF-8087 to 4 SATA Breakout Cable 3.3FT 2Pack
Connects a Mini SAS SFF-8087 controller to four SATA drives at 6 Gbps per drive using a 3.3 ft forward breakout cable with locking latches
- Rated speed6 Gbit/s
- Conductor typeCopper
- Product typeSAS to SATA, Mini SAS to SATA
- Product colorBlack+Blue
- Overall length3.3
- Key featuresMINI SAS SFF-8087 to SATA 1M
- Connect four drives with one SFF-8087 port
- 6 Gbps per drive for fast data transfer
- Locking latches on both ends secure the connection
- 30 AWG thin cables simplify internal routing
- 3 ft length fits most chassis layouts
BUCIER SFF-8087 Breakout Cable 3.3FT
This two-pack provides SFF-8087 to 4 SATA forward breakout cables measuring 3.3 feet each. The cables connect a Mini SAS 36-pin male host port on a controller or motherboard to four SATA 7-pin female target connectors for drives or backplanes. Rated for 6 Gbps per drive, they use 30 AWG copper conductors for flexible routing inside chassis.
Suits builders adding four SATA drives to one Mini
The pair is ideal for expanding storage on a SAS HBA or RAID controller that presents an SFF-8087 interface. It will not work if you plug the SFF-8087 end directly into a backplane, as the pinout is host-to-target only. Buyers needing reverse breakout or sideband cables should look elsewhere.
Simple push-fit install with locking latches
Both the Mini SAS and SATA ends feature locking latches that click into place for a secure internal link. The thin 30 AWG wires bend easily around tight drive cages. The only common issue is inserting the SFF-8087 connector into a target backplane instead of a host controller, which prevents the link from establishing.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $28.99
- Pricier than about 88% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | ADCAUDX |
| Model name | SFF-8087 to SATA 1M |
| Product type | SAS to SATA, Mini SAS to SATA |
| Product color | Black+Blue |
| Performance | |
| Rated speed | 6 Gbit/s |
| Size & build | |
| Conductor type | Copper |
Questions about this item
What controller or motherboard port does the SFF-8087 end plug into?
The 36-pin SFF-8087 male connector attaches to a SAS HBA, RAID controller or motherboard Mini-SAS port that serves as the host side.
Will the four SATA connectors support drives limited to 3 Gbit/s?
Each SATA 7-pin female connector operates at up to 6 Gbit/s and is backward compatible with 3 Gbit/s SATA drives.
How can I verify the cable is seated correctly after installation?
Both the Mini-SAS and SATA ends have locking latches that click when fully inserted, confirming a secure connection.
More in SATA & eSATA Drive Cables
Similar items
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors





