BUCIER SFF-8087 to 4×SATA Forward Breakout Cable 3.3FT
Connects a Mini-SAS SFF-8087 controller to four SATA drives with locking latches at 6 Gbps per drive
- Rated speed6 Gbit/s
- Conductor typeCopper
- Product typeMini-SAS Cables
- Product colorBlack+Blue
- Overall length3.3
- Key featuresSff-8087 to sata forward breakout mini sas to sata cable
- Connects SAS HBA to four SATA drives
- 3 ft length suits compact chassis
- 6 Gb/s per drive for fast transfers
- Locking latches on both ends secure links
- 30 AWG thin cables simplify cable management
Connection Breakout
This BUCIER cable splits a single SFF-8087 Mini-SAS port into four SATA connectors. It links a host controller or RAID card directly to up to four hard drives or solid-state drives. The 3.3ft length suits typical server or workstation chassis routing. Professionals expanding internal storage use this forward breakout to add drive bays without extra controllers.
Controller Upgrade Path
The cable replaces a direct backplane link when the backplane lacks an SFF-8087 input. It is worth fitting when a RAID card or HBA exposes only Mini-SAS ports but the target drives use standard SATA interfaces. Do not connect the SFF-8087 end to a backplane; the pinout is host-to-target only. Each SATA lane runs at 6 gigabits per second.
Installation Notes
The 30 AWG conductors are thin and flexible, easing routing in tight bays. Both the 36-pin Mini-SAS plug and the four 7-pin SATA plugs carry locking latches for secure seating. A common error is reversing host and target ends; the SFF-8087 side must attach to the controller. Labels on each SATA tail help match drives to ports during assembly.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $15.99
- Pricier than about 60% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | ADCAUDX |
| Model name | MINISAS-001 |
| Product type | Mini-SAS Cables |
| Product color | Black+Blue |
| Performance | |
| Rated speed | 6 Gbit/s |
| Size & build | |
| Conductor type | Copper |
Questions about this item
What connector and pin count does the host end of this cable use?
The host end uses an internal SFF-8087 36-pin male connector with a locking latch.
How do you attach the cable to the controller and drives, and what is the common mistake?
Plug the SFF-8087 male end into the HBA or RAID controller and the four SATA 7-pin female ends into the drives; do not connect the SFF-8087 side to a backplane.
What maintenance might the locking latches on this cable need over time?
The locking latches on both the SFF-8087 and SATA connectors can loosen with repeated mating cycles; reseat or replace the cable if a latch no longer holds firmly.
More in SATA & eSATA Drive Cables
Similar items
STARTECH SLSATAADAP6 6-Inch Slimline SATA to SATA Adapter
- 6 in (15.2 cm)
- Others
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
Longdex SATA22PEC-50CM-4 SATA 22-pin female to 7+15-pin male combo extension cable 50cm 4-pack
- Sata, Sata
- SATA
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
ADCAUDX SATA-005 6pcs SATA III 1m 6Gbps Braided Cable Set
- 6 GB/s
- SATA Cables





