BUCIER SFF-8643 to 4 SATA Breakout Cable 0.5M
Connects an SFF-8643 host port to four SATA drives with a 0.5 m, 30 AWG breakout cable
- Rated speed6 GB/s
- Conductor typeCopper
- Product typeMini-SAS Cables
- Product colorBlack, Blue
- Overall length1.6
- Key featuresSff-8643 to sata, mini sas hd to sas
- Connect four drives with one 0.5 m breakout cable
- SFF-8643 host plugs into RAID controller or motherboard
- Four SATA 7-pin targets attach HDDs or SSDs
- 6 Gb/s per drive over copper conductors
- 30 AWG flexible wires with locking latches on both ends
SFF-8643 to Four SATA Breakout Cable
The BUCIER cable connects a Mini-SAS HD SFF-8643 host port on a RAID controller or motherboard to four SATA drives. It is built for storage expansion in servers and workstations where a single high-density port must fan out to individual drives. The 0.5 m length suits compact chassis and backplane wiring.
Upgrade from Direct SFF-8643 Drive Attachment
Use this breakout when the controller offers only SFF-8643 ports but the drives or backplane present standard SATA connectors. The jump is worth it whenever a 12 Gbps SAS HBA or RAID card must serve 6 Gbps SATA targets without a dedicated SATA backplane. It does not replace a native SATA controller for systems that already have enough SATA ports.
Straightforward Internal Install
Both ends feature locking latches that click into place, reducing the chance of accidental disconnects inside a vibrating chassis. The 30 AWG conductors are thin and flexible, easing routing in tight drive bays. The main pitfall is plugging the SFF-8643 male end into a backplane instead of the controller; the cable is wired host-to-target only and will not function if reversed.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $16.99
- Pricier than about 63% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | ADCAUDX |
| Model name | HD MINISAS-004 |
| Product type | Mini-SAS Cables |
| Product color | Black, Blue |
| Performance | |
| Rated speed | 6 GB/s |
| Size & build | |
| Conductor type | Copper |
Questions about this item
What connector and cable dimensions does the SFF-8643 end use for fitting inside a server chassis?
The host end uses an internal Mini-SAS HD SFF-8643 male connector with a locking latch, built on 30 AWG thin flexible copper conductors and 0.5 m overall length.
Which orientation do I plug the cable so the controller talks to four SATA drives?
Connect the SFF-8643 male side to the SAS RAID controller or motherboard port; the four SATA 7-pin female tails attach to the drives or backplane — reversing this will not work.
When should I expect to replace the cable or its latches in a running array?
Replace the cable if any SATA 7-pin female connector or the SFF-8643 locking latch becomes loose, cracked or shows intermittent 6 Gb/s link errors on a drive.
More in SATA & eSATA Drive Cables
Similar items
STARTECH SATRD30CM 30cm SATA cable latching 6Gbps
- 11.81 in (30 cm)
- SATA III
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
Transway's Marketplace DT-5025D USB 2.0 to SATA 2.5" cable .5 ft
- Usb2.0 to sata and…
- Clear Blue
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors





