CableCreation 5-Pack SATA III 6.0 Gbps 8-inch Female to Female Locking Latch Red
Five SATA III cables with locking latches, 8 inches long for compact builds, supporting 6.0 Gbps throughput
- 6 Gbps throughput with SATA 3.0 revision
- Backward compatible with SATA 1 and 2 standards
- 8-inch length fits Mini-ITX and NUC builds
- Locking latches prevent accidental disconnection
- Five cables included for multiple drive connections
5-Pack SATA III Locking Cables
This set contains five red SATA III cables rated for 6.0 Gbps throughput. Each cable uses a 7-pin female-to-female layout with a locking latch on both ends. The 8-inch length suits tight chassis such as Mini ITX builds and Intel NUC units. They are backward compatible with SATA revision 1 and 2 devices.
Builders with compact cases and locking ports
The short reach and secure latches help cable routing in small-form-factor systems where vibration or cramped space might dislodge standard plugs. Buyers needing longer runs for full-tower cases or external eSATA connections should look at different cable lengths or connector styles.
Locking latches prevent accidental disconnects
The integrated latch on each connector clicks into place, keeping the link stable during transport or when adjacent components press against the cable. The red jacket makes the cables easy to identify among other wiring. No additional software or adapters are included in the pack.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $14.99
- Pricier than about 55% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
What motherboard or controller connector do I need to plug these 7-pin female SATA cables into?
You need a standard 7-pin male SATA port on the motherboard or host controller for each cable end.
Will these SATA 3.0 cables work with my older SATA I or SATA II hard drives and optical drives?
Yes, the cables are backwards compatible with SATA revision 1 and 2 devices at their native speeds.
How can I verify the locking latches are engaged after I connect the cables inside my Mini ITX build?
Push each connector until the latch clicks audibly and the cable resists a gentle pull.
More in SATA & eSATA Drive Cables
Similar items
STARTECH SATAPOWADPL 6 in 4 pin Molex to left angle SATA power adapter cable
- 6 in (15.2 cm)
- Cable Connectors
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
BENFEI 000306black-6p SATA cable 6 pack 18 inch 90 degree locking latch black
- Male-to-Male
- SATA III
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
Cable Matters 104008-24x3 3-Pack 90° SATA Cable 24in Red
- Sata
- SATA





