CableCreation Molex to SATA Power Cable Adapter 4-Inch 5-Pack
Five adapters convert legacy Molex LP4 power ports to 15-pin SATA connectors for drives or optical units
- Connects SATA drives to legacy Molex power supplies
- 4-pin Molex male to 15-pin SATA female power connector
- 4-inch straight connectors simplify internal cable routing
- Five adapters included for multiple drive installations
- Supports Serial SATA hard drives and optical drives
Connecting Legacy Power to SATA Drives
This five-pack of 4-inch adapters converts a 4-pin Molex LP4 connector from a power supply into a 15-pin SATA power connector. The straight connectors keep cable runs tidy inside the case. Each adapter lets you power a Serial SATA hard drive or optical drive without replacing the PSU.
Suits Builders Using Older Power Supplies
These cables are ideal when a PSU lacks native SATA power leads but has spare Molex ports. They are not for installations that require right-angle SATA plugs for tight clearances. Builders needing longer reach between the PSU and drive bays should look at something else.
15-Pin SATA Power Connector
The female 15-pin SATA power socket is the sole interface that determines whether your drive or device can be powered. Verify that the target hardware accepts a standard SATA power plug before purchasing.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $15.99
- Pricier than about 60% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
Which pack size should I choose for this Molex to SATA adapter?
The product is sold as a 5-pack, giving you five individual 4-inch cables to connect multiple SATA drives to Molex power ports.
What does the 15-pin SATA connector provide for my drive?
The 15-pin SATA power connector supplies the standard power interface that Serial SATA hard drives and optical drives require from a legacy Molex LP4 source.
How does the Molex LP4 interface limit this adapter in practice?
The adapter converts a 4-pin Molex LP4 male connector into a 15-pin SATA female connector, allowing older power supplies to run newer SATA devices.
More in SATA & eSATA Drive Cables
Similar items
STARTECH SLSATAADAP6 6-Inch Slimline SATA to SATA Adapter
- 6 in (15.2 cm)
- Others
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
Longdex SATA22PEC-50CM-4 SATA 22-pin female to 7+15-pin male combo extension cable 50cm 4-pack
- Sata, Sata
- SATA
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
ADCAUDX SATA-005 6pcs SATA III 1m 6Gbps Braided Cable Set
- 6 GB/s
- SATA Cables





