CableCreation SATA III cable 10-pack 18-inch 6.0 Gbps locking latch Red
Ten SATA III cables with locking latches deliver 6.0 Gbps throughput for internal drives
- SATA III 6.0 Gbps throughput for fast drive transfers
- Backwards compatible with SATA I and SATA II devices
- Locking latches on both ends prevent accidental disconnection
- 18-inch length suits tidy internal cable routing
- 10 cables in one pack for multiple drive builds
SATA III 10-pack for internal drives
This pack contains ten 18-inch SATA III cables rated for 6.0 Gbps throughput. They connect motherboards or host controllers to internal hard drives and optical drives. The cables are backwards compatible with SATA revision 1 and 2 devices.
Locking latch maintains steady signal
Spring-steel locking connectors on both ends prevent the cables from working loose during vibration or thermal cycling. The latch keeps each connection seated so sustained data transfers do not suffer from intermittent contact.
Simple push-on install with visible latch
Each cable plugs straight into a standard 7-pin SATA port; the red jacket makes routing easy to trace. The only common issue is forcing the connector upside down, which damages the latch — align the notch before pressing.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $19.99
- Pricier than about 73% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
Does the SATA III cable generate heat or noise when used continuously?
These are passive data cables with no active components, so they produce no heat or noise during all-day operation.
What hardware must I already have to use these 18-inch SATA III cables?
You need a motherboard or host controller with a SATA port and an internal SATA hard drive or DVD drive to connect.
Will these SATA 3.0 cables work with my older SATA I and SATA II drives?
Yes, the cables are backwards compatible with SATA revision 1 and 2 devices while still supporting up to 6.0 Gbps throughput.
More in SATA & eSATA Drive Cables
Similar items
Electop Black-02 SATA III 90° braided cable 20 in black 5-pack
- Sata 3
- Composite
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
2-Power ST345AP SATA to USB Type-A Cable 1.8 in Red
- 1.8 in (4.57 cm)
- Type
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors





