CableCreation SFF-8643 to 4× SATA cable 0.5 m
Connects a Mini SAS SFF-8643 host port to four SATA drives at 12 Gb speeds
- Connect RAID controller to four SATA drives via SFF-8643 host port
- 5 m length keeps internal cabling tidy and airflow clear
- Supports 12 Gb SAS speeds for high-throughput storage arrays
- SFF-8643 connector reduces PCB footprint for denser port layouts
- Four 7-pin SATA targets attach directly to hard drives or SSDs
SFF-8643 host to four SATA 0.5 m cable
This internal cable connects a motherboard or RAID controller with an SFF-8643 host port to up to four SATA hard drives or SSDs. The 0.5 m length suits tight chassis routing. It carries SAS 12 Gb/s signals to each SATA target device.
Builders with SFF-8643 host ports only
Suits systems where the controller or motherboard presents an SFF-8643 host connector. Not for backplanes or enclosures that expose an SFF-8643 target port, because the pin-out direction is opposite. Buyers who need a longer reach or a different connector orientation should look elsewhere.
SFF-8643 host connector direction
The cable works only when the SFF-8643 side plugs into a host port on a controller or motherboard. If the same connector appears on a backplane as a target, the cable will not function. Verify the port role before purchase.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $7.99
- Cheaper than about 80% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
How do I confirm the SFF-8643 host end is linked correctly after connecting four SATA drives?
The controller BIOS or operating system should detect each attached drive at full 12 Gb/s SAS speed once the cable is seated.
What comes with the cable and what extra parts are needed?
Only the 0.5 m SFF-8643 to 4× SATA assembly is supplied; power cables and a compatible RAID controller or motherboard port must be provided separately.
Which length should I choose for a standard server chassis?
The 0.5 m (1.6 ft) version fits typical internal routing between a motherboard Mini SAS port and nearby drive bays.
More in SATA & eSATA Drive Cables
Similar items
Micro Connectors SATA cable 40 inches straight to right angle locking latch black 3 pack
- Black
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
Micro Connectors 23" 1-to-4 15-Pin SATA Power Splitter Cable
- SATA
- Black
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
Micro Connectors 0.5 m SATA III Right Angle to Right Angle Data Cable 3-Pack Red
- Red





