CableCreation SFF-8644 to 4 SATA 7 Pin Cable 2 M / 6.6 FT
Connects an SFF-8644 host port to four SATA drives at up to 6.0 Gbps per lane with a 2 M woven-mesh cable
- Connect HBA cards to four SATA drives via SFF-8644 36-pin interface
- Achieve up to 6.0 Gbps per lane with SAS 2.1 compliance
- Woven mesh sheath and locking latches maintain airflow for 24/7 operation
- Fan-out design maximises port density on adapter cards and servers
- Compatible with LSI 9202-16e and Adaptec 8885, 71685, 78165 RAID controllers
Host connection
This cable links an SFF-8644 Mini SAS HD 36-pin port on an HBA or RAID card to four SATA drives. The SFF-8644 end uses a pull-to-release latch for secure insertion. It supports SAS 2.1 and delivers up to 6.0 Gbps per lane. Length is 2 M / 6.6 FT with a woven mesh sheath that minimises airflow disruption.
Usage fit
It suits builders connecting up to four SATA SSDs or HDDs to cards such as the LSISAS9202-16e or Adaptec 71685, 8885, 8885Q, 8885E and 78165. Buyers whose host lacks an SFF-8644 port or who need more than four drive connections should look at a different cable or expander.
Speed rating
The assembly is rated for 6.0 Gbps per lane under SAS 2.1 compliance. If the host controller or target drives operate at a lower generation the link will negotiate down, but the cable itself imposes no further bottleneck.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $33.99
- Pricier than about 90% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
Should I pick the 2 metre or 6.6 foot length for my server build?
Both figures describe the same cable; 2 metres equals 6.6 feet, so choose whichever unit you prefer.
Will the 6.0 Gbps per lane rating deliver full speed on my RAID controller?
Each lane runs up to 6.0 Gbps, matching SAS 2.1, so the cable will not bottleneck drives connected to a compatible HBA.
Does the SFF-8644 connector lock into standard Mini SAS HD ports on HBA cards?
Yes, the pull-to-release SFF-8644 plug fits all Mini SAS HD (SFF-8644) ports, including those on the listed LSI and Adaptec RAID cards.
More in SATA & eSATA Drive Cables
Similar items
Nippon Labs S3L0.5-90/180SL-50P SATA cable 6 in 90/180° 50-pack
- 6 in (15.2 cm)
- SATA III
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
BUCIER M.2 Key M to PCIe 4.0 X16 Riser Cable 300mm SATA Power
- 8 GB/s
- Male-to-Female
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA





