CableCreation SFF-8644 to 4 SATA 7 Pin Cable 3.3 FT
Connects an SFF-8644 HBA card to four SATA drives with a 3.3 FT cable supporting 6 GB/s data rates
- Connects HBA cards to four SATA drives
- Supports data rates up to 6 GB/s
- SAS 2.1 compliant for reliable server use
- Locking latches and mesh sheath improve airflow
- 3 ft length suits typical chassis layouts
SFF-8644 to four SATA 3.3 ft cable
This new CableCreation cable connects an SFF-8644 HD Mini SAS 36-pin host port on an HBA card to four SATA 7-pin drives such as SSDs or HDDs. It supports data rates up to 6 GB/s and complies with SAS 2.1. A woven mesh sheath and locking connector latches reduce airflow restriction inside the case.
Suits builders adding multiple SATA drives
Not for installations that require a different host connector or more than four SATA breakout connections. Buyers needing longer runs or alternative fan-out counts should look at other cable configurations.
36-pin SFF-8644 host connector
The 36-pin SFF-8644 interface and SAS 2.1 rating determine whether the cable matches the host controller and the desired 6 GB/s link speed. Verify the HBA port type before purchase.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $21.99
- Pricier than about 78% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
What maximum data rate does the SFF-8644 to 4 SATA cable support under sustained use?
The cable is rated for up to 6 GB/s and complies with SAS 2.1, so sustained throughput is limited by that specification.
How does the woven mesh sheath affect heat and airflow when the cable runs all day in a server chassis?
The woven mesh sheath is designed to minimise impact on airflow, helping maintain efficient cooling during continuous 24/7 operation.
Which host-side connector must the system already have for this cable to plug in?
The host end requires an SFF-8644 HD Mini SAS 36-pin port, typically found on an HBA or RAID controller card.
More in SATA & eSATA Drive Cables
Similar items
SXDOOL SATA cable for ThinkPad T470 T480 A485 475 0UR495
- Case Fan Accessory
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
Pagaloce SATA to USB 3.0 & Type-C Adapter Cable 1m Grey
- Sata, Usb Type C
- Male-to-Male





