CableCreation U.2 SFF-8639 NVME PCIe Extension Cable 50cm 68pin
A 50 cm male-to-female extension cable with a 68-pin SFF-8639 connector extends U.2 NVME PCIe links at up to 2 GB/s on PCIe 2.0 or 4 GB/s on PCIe 3.0
- Extends U.2 NVME connections with male-to-female 68-pin design
- Supports 2 GB/s on PCIe 2.0 and 4 GB/s on PCIe 3.0
- 50 cm length fits tight chassis routing
- 68-pin SFF-8639 interface matches enterprise SSD pinout
- Lifetime warranty backs long-term reliability
U.2 SFF-8639 NVMe PCIe Extension Cable
This 50cm male-to-female cable extends a U.2 SFF-8639 connection for NVMe PCIe SSDs. It carries a 68-pin interface and supports data rates up to 2 GB/s with PCI Express 2.0 or 4 GB/s with PCI Express 3.0. The black cable is sold new with a lifetime warranty from CableCreation.
Simple 68-pin plug-in installation
The cable connects directly between a U.2 host port and a U.2 drive without tools or drivers. Routing the 50cm length inside a chassis is the only practical step; ensure the connector orientation matches the keyed SFF-8639 socket. No software configuration is required for the link to negotiate PCIe 2.0 or 3.0 speeds.
Builders extending a U.2 SSD link
This suits system integrators who need to relocate a U.2 NVMe drive away from the motherboard or backplane. It does not serve users requiring SATA or eSATA signalling, nor those needing a longer reach than 50cm. Buyers without a U.2 SFF-8639 interface on both host and drive cannot use this cable.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $23.99
- Pricier than about 81% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
How can I verify the cable is delivering up to 4 GB/s after connecting it?
The cable supports PCI Express rev. 3.0 for up to 4 GB/s; check your drive and controller both negotiate PCIe 3.0 x4 in the system BIOS or OS device manager to confirm full speed.
What connectors and length does this 50cm extension include, and what must I supply?
It provides a U.2 SFF-8639 68-pin male connector on one end and a matching female on the other; you must supply the U.2 NVMe SSD and the host controller or backplane.
Which PCIe revision should I match when choosing this 68-pin U.2 cable for my drive?
The cable handles both PCI Express rev. 2.0 (up to 2 GB/s) and rev. 3.0 (up to 4 GB/s); select it if your drive and host controller run at either revision.
More in SATA & eSATA Drive Cables
Similar items
2-Power SATA to USB 3.0 Adapter with 12V 2A Power Supply (Red)
- 5 Gbit/s
- Red
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
BUCIER PCIe 2.0 to 2-Port SATA 3.0 Card with Low-Profile Bracket and Cables
- Copper





