Cables To Go 10220 eSATA cable Black 3.3 Feet 1 Meter
A 1-metre shielded eSATA cable rated for 6 Gbps transfers and hot-plug operation
- Product typeAT
- Hot-pluggable eSATA connection for convenient drive swaps
- Supports up to 6 Gbps transfer rates for fast external storage
- Shielded 3.3 ft cable reduces interference over longer runs
- Up to 6× faster than USB 2.0 and 1394 alternatives
- Lifetime warranty provides long-term confidence in reliability
What this cable connects
The Cables To Go 10220 is an eSATA cable designed to link external SATA storage devices to a compatible host port. It suits users who need a direct, shielded connection for an external drive enclosure or docking station.
Transfer rate ceiling
The cable supports hot-pluggable operation with transfer rates up to 6G. That single bandwidth figure determines whether the link can keep pace with the attached drive’s maximum throughput.
Length and practical limits
At 3.3 feet (1 meter) it reaches nearby peripherals without excess slack, while the specification allows shielded runs up to 2 meters for longer routes. It outperforms legacy USB 2.0 and 1394 external links, but it cannot serve internal SATA ports or devices requiring a different interface.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $16.99
- Pricier than about 63% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Product type | AT |
Questions about this item
What does the 6G transfer rate actually deliver when the cable is connected?
The cable supports eSATA at up to 6 Gbit/s, so an external drive can reach the full SATA 6G speed instead of being limited by slower external interfaces.
Which interface standard does the connector follow and what speed ceiling does it enforce?
It uses the eSATA connector defined by the SATA 6G specification, capping the link at 6 Gbit/s when both host and device support that rate.
What length and connector style are needed for the cable to reach and mount securely?
The cable is 3.3 feet (1 meter) long with standard eSATA plugs on each end, fitting the defined external SATA connector footprint for a secure hot-pluggable connection.
More in SATA & eSATA Drive Cables
Similar items
STARTECH SATRD30CM 30cm SATA cable latching 6Gbps
- 11.81 in (30 cm)
- SATA III
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
Transway's Marketplace DT-5025D USB 2.0 to SATA 2.5" cable .5 ft
- Usb2.0 to sata and…
- Clear Blue
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA





