CoolGear SS-22MPS SATA power splitter 1 to 3 15-pin
Splits one 15-pin SATA power input into three 15-pin outputs for SATA devices
- Design style1 SATA to 3X SATA
- Splits one SATA power connector into three 15-pin outputs
- 15-pin connectors match standard SATA device power ports
- 6-inch leads give flexibility for drive placement inside the case
- Supports multiple SATA drives from a single PSU cable
- Simple plug-in adapter requires no extra configuration
Power split for three drives
This SATA power splitter turns one 15-pin connection into three, letting you run extra SSDs or hard drives from a single PSU lead. It suits builders adding storage without spare power connectors.
Check connector count and cable reach
Verify that your power supply has an unused 15-pin SATA plug and that the 6 inch tails reach every drive bay in your chassis. The splitter draws all current through the one input, so confirm the PSU rail can handle the combined load.
Three 15-pin outputs on short leads
The bundle provides three female 15-pin heads on 6 inch cables, giving a tidy fan-out for adjacent bays. No extra adapters or software are included, so installation is purely plug-and-play.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $2.99
- Cheaper than about 95% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Model name | SS-22MPS |
| Design style | 1 SATA to 3X SATA |
Questions about this item
Does the SS-22MPS include the SATA drives or only the splitter cable?
Only the splitter cable is supplied; three SATA drives or other 15-pin devices must be purchased separately.
The title mentions a Y cable but the specs say 1 to 3 — which layout does the SS-22MPS actually have?
The SS-22MPS provides one 15-pin input branching to three 15-pin outputs, not a simple Y with two outputs.
Will six inches of cable reach from my PSU to a drive cage in a full-tower case?
At six inches the leads are short; they suit tight drive stacks or backplane trays rather than long runs across a full-tower chassis.
More in SATA & eSATA Drive Cables
Similar items
Nippon Labs SATA3L-1.5FT-RD 1.5 ft SATA III cable UV Red
- 1.5 ft (0.46 m)
- SATA III
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
Darkside DS-0966 SATA M/F Extension Cable Jet Black
- Black
- Compliment your bui…
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
Darkside CONNECT SATA Cable Type 16 5-Pin 30cm Black DS-1019
- 1 ft (0.3 m)





