CoolGear USBG-124ASD USB 2.0 to SATA IDE Adapter
Connects 1.8, 2.5, 3.5 or 5.25 inch IDE and SATA drives to USB 2.0 at 480 Mb/s with included power adapter for 3.5 and 5.25 inch devices
- Product typeAdapter
- Product colorBlack
- Overall length< 6 ft
- DetailsUSB 2.0 to SATA Converter
- Key featuresJM20337 IDE and SATA to USB chip for DUAL Drive Usability, U
- Connect IDE and SATA drives via USB 2.0 port
- Dual-drive support with JM20337 chip for IDE and SATA
- 480 Mb/s max transfer speed over USB 2.0
- Powers 3.5″/5.25″ drives with adapter, 2.5″ via bus
- Works with drives from 20 GB to 2 TB capacity
USB 2.0 to SATA and IDE Adapter
The CoolGear USBG-124ASD connects SATA and IDE hard drives or optical drives to a computer through a USB 2.0 port. It supports 2.5 inch, 3.5 inch and 5.25 inch form factors including SATA I, SATA II and IDE ATA-66, 100 and 133 devices. The adapter is intended for data migration, drive recovery or temporary access by technicians and home users.
Sustained Transfer Behaviour
The JM20337 chipset limits throughput to the USB 2.0 maximum of 480 Mb/s, so large transfers run at that ceiling rather than the native drive speed. Mechanical drives will not saturate the link, but solid-state media will be bottlenecked by the interface during extended copy operations. The supplied power adapter feeds 3.5 inch and 5.25 inch units, while 2.5 inch drives draw bus power.
Installation and Common Issues
Driver installation is automatic on modern operating systems and the drive appears as a removable volume once connected. The cable length is under six feet, so the host port must be within reach of the work surface. A frequent problem is forgetting the external power brick for larger drives, which causes the device to spin down or disappear mid-transfer.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $31.99
- Pricier than about 90% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | CoolGear |
| Product type | Adapter |
| Product color | Black |
| Size & build | |
| Overall length | < 6 ft |
Questions about this item
How hot or noisy does the JM20337 chip get when the adapter runs all day?
The adapter has no fan; the JM20337 chip runs passively cooled and draws power from the USB 2.0 port for 2.5″ drives, so heat and noise stay minimal during continuous use.
Which power supply must I already own to run a 3.5″ or 5.25″ drive with this adapter?
The included high-output power adapter connects to mains power and provides the 12 V rail that 3.5″ and 5.25″ IDE or SATA drives require.
Will my older ATA-66, ATA-100 or ATA-133 IDE drives work through the USB 2.0 port on this adapter?
Yes — the JM20337 chip supports IDE ATA-66/100/133 drives from 1.8″ up to 5.25″, so legacy drives connect and transfer at USB 2.0 speeds.
More in SATA & eSATA Drive Cables
Similar items
OWC In-Line Digital Thermal Sensor HDD Upgrade Cable for iMac 2011
- SATA
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
Vantec CB-ST00U3 USB 3.0 to SATA Adapter Red 1.8 in
- 1.8 in (4.57 cm)
- SATA





