Corn Electronics 10 Port SATA Power Splitter Cord FH-10 PWM
A 10-port SATA-powered PWM fan hub with a 500 mm power cable and 700 mm PWM lead, rated for 5 A at 12 V
- Product typeCase Fan Accessory
- Product colorBlack
Color Black
- Connect up to 10 fans from one SATA power source
- PWM cable reaches 700 mm for flexible routing
- SATA power cable spans 500 mm to reach drive bays
- Rated at 5 A continuous for stable multi-fan operation
- 12 V input matches standard PSU rail for direct compatibility
10-Port SATA Fan Hub
The Corn Electronics FH-10 is a case fan accessory that distributes a single PWM signal and 12 V SATA power to ten extension ports. It targets builders who need to run many fans from one motherboard header without exceeding the header’s current limit.
Replaces Daisy-Chain Cables
This hub replaces fragile daisy-chain splitters by providing a dedicated 500 mm SATA power-in lead and a 700 mm PWM-in lead rated for 5 A total. The jump is worth it when the motherboard header cannot supply enough current for all connected fans.
Suits High-Density Air Builds
It suits high-density air-cooling builds that require ten fans on a single PWM curve. Builders who need voltage control instead of PWM, or who want to power devices other than fans, should look at something else.
How it compares
Measured against everything we stock in Y-Splitter Power Cables, at today’s prices. Recalculated every night.
- Price $9.99
- Cheaper than about 83% of the 428 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Product type | Case Fan Accessory |
| Product color | Black |
| More details | |
| LED lighting | No |
Questions about this item
Does the 500 mm SATA power-in cable reach a bottom-mounted PSU in a full-tower case?
The SATA power-in cable is 500 mm long; measure from your PSU to the planned hub location to confirm reach.
How do I connect the 700 mm PWM-in cable to the motherboard so all 10 fans follow one curve?
Plug the single 700 mm PWM-in cable into one motherboard PWM header; the hub then mirrors that signal to all 10 extension ports.
When should I replace the hub if I run 10 fans near the 5 A limit?
Replace the unit if the SATA connector or cables become warm, discoloured or if fans start stuttering under sustained 5 A load.
More in Y-Splitter Power Cables
Similar items
Ruth's sister 40cm 1-to-5 4-pin Molex PWM fan hub power splitter cord
4XEM 4XHDMIVGA10FTU 10ft HDMI to VGA adapter cable with USB power
OHKIKOME SATA Power Splitter Cord 19.7in Male to 5 Female Black
- 6 Gbit/s
- Male-to-Female
Shenzhen Aimilai Technology Co.Ltd. 12-Way 5V RGB LED Splitter Hub with PMMA Case and Magnetic Standoff
HUALAND HL-0017 5V 3-Pin ARGB Splitter Cable 1-to-2 11 Inch 2-Pack
- 3 Pin, Female-to-Fe…
- Black





