Arctic Silver AS5-3.5G thermal paste 3.5g tube
- 3.5g
- -50 to 130 °C
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
High-conductivity 17.5 W/mK paste in a 20 g can for CPU, GPU and LED cooling from -50 °C to 250 °C
Coxbyte TG-30 thermal paste delivers 17.5 W/mK conductivity in a 20 g can. The non-conductive silicone formula suits CPUs, GPUs, gaming laptops and LED modules. It operates from -50 °C to 250 °C without evaporating. Designed for enthusiasts who need reliable heat transfer under sustained loads.
Upgrading is worthwhile if stock or basic compound leaves cores running hot during gaming or rendering. The nanocarbon composite cuts the core-to-cooler delta by more than 20 °C in typical use. Degradation stays below 3 % over five years, so re-application intervals are longer. Not for builders who only need a basic paste for light office workloads.
Ensure the heatsink makes even contact; uneven pressure traps air bubbles regardless of paste quality. Clean old compound fully with isopropyl alcohol before applying the centre-dot method. The target layer thickness matches a sheet of A4 paper. No electrical conductivity risk, but avoid excess squeeze-out near socket pins.
Measured against everything we stock in Thermal Paste, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Coxbyte |
| Product line | TG |
| Model name | 30 |
| Performance | |
| Thermal conductivity | 17.5 W/mK |
| Size & build | |
| Net content | 20g |
| Environment & compliance | |
| Continuous-use temperature | -50 to 250 °C |
The 20g canned paste is sufficient for multiple CPU or GPU applications; apply a layer roughly the thickness of an A4 sheet on each die.
Clean the die, place a dot of paste at the centre, then spread it evenly with a scraper until the layer matches the thickness of an A4 paper.
Performance loss stays under 3 % over five years; the compound remains stable from -50 °C to 250 °C without evaporating.
More in Thermal Paste
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?