Darkside Computer Modding 30cm SATA 3.0 180° to 180° Titanium Gray sata cable
A 30 cm SATA 3.0 data cable with straight 180° connectors on both ends in titanium gray
- Cable length1 ft (0.3 m)
- SATA 3.0 speed supports fast data transfer
- 30 cm length fits compact builds neatly
- Straight 180° connectors simplify drive installation
- Titanium Gray sleeving adds a clean look
- Latch design keeps the connection secure
30cm SATA 3.0 cable for modders
This Darkside Computer Modding cable connects storage devices with straight 180-degree connectors on both ends. The Titanium Gray sleeving adds a clean aesthetic for custom builds. It suits enthusiasts who value cable management and visual consistency. Buyers needing angled connectors or different lengths should look elsewhere.
Sustained signal integrity over 30cm
The 1 ft length keeps latency low inside compact chassis. SATA 3.0 specification supports 6 Gb/s throughput across this distance without degradation. Shielded sleeving protects against electromagnetic interference during continuous read or write cycles. Latching connectors maintain a secure link under vibration or thermal expansion.
SATA 3.0 interface practical limits
The cable carries the full SATA 3.0 bandwidth of 6 Gb/s over its 30 cm run. Longer runs beyond the specification risk signal loss, so this length stays well within safe margins. It does not support eSATA external shielding requirements. Installers must ensure the host controller and drive both negotiate at 3.0 speeds.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $2.99
- Cheaper than about 95% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Size & build | |
|---|---|
| Cable length | 1 ft (0.3 m) |
Questions about this item
Does the 30 cm SATA 3.0 cable generate any extra heat or electrical noise during continuous operation?
No, a passive SATA 3.0 data cable adds no measurable heat or electrical noise when running all day.
What existing hardware must I already have to use this 180° to 180° SATA data cable?
You need a motherboard or controller with a standard 7-pin SATA port and a drive or backplane that also accepts a straight 7-pin SATA connector.
Will this titanium-gray sleeved cable work reliably with an older SATA 2.0 hard drive I plan to keep?
Yes, the SATA 3.0 cable is fully backward compatible and will operate at SATA 2.0 speeds with your existing drive.
More in SATA & eSATA Drive Cables
Similar items
Nippon Labs SATA3L-1.5FT-RD 1.5 ft SATA III cable UV Red
- 1.5 ft (0.46 m)
- SATA III
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
Darkside DS-0966 SATA M/F Extension Cable Jet Black
- Black
- Compliment your bui…
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
Darkside CONNECT SATA Cable Type 16 5-Pin 30cm Black DS-1019
- 1 ft (0.3 m)





