Darkside Computer Modding CONNECT Y-Cable 4" 3-Pin Type 2s DS-0323
Four-inch Y-cable splits one three-pin fan header to power two LED strips
- Cable length4 in (10.2 cm)
- Connects two LEDs to one header via Type 2s Y-design
- Universal 3-pin fan connector fits standard motherboard or controller ports
- Compact 4-inch length reduces cable clutter in tight builds
- DarkSide Connect system lets you swap LED connectivity without replacing units
- Extends power to modding LEDs for flexible custom-loop placement
Universal Y-Cable for LED Modding
The Darkside CONNECT DS-0323 is a 4-inch Y-cable that splits a single 3-pin fan header into two connectors. It lets builders power a pair of LED strips or fans from one motherboard or controller port. The short length keeps routing tidy inside compact cases.
Steady Power Delivery
Each branch carries the same voltage and signal as the source header, so both connected devices run at identical brightness and speed. There is no active circuitry to degrade over time, making the cable reliable for continuous operation in always-on systems.
Check Header Count and Polarity
Verify that your board or controller has a spare 3-pin header and that the LED products use matching pinouts. The cable adds no extra headers, so a second Y-cable is required if you need to connect more than two devices.
How it compares
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
- Price $1.78
- Cheaper than about 99% of the 7,693 comparable items (median $14.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Size & build | |
|---|---|
| Cable length | 4 in (10.2 cm) |
Questions about this item
Does the 4-inch 3-pin Y-cable add noticeable heat or electrical load when running two LEDs continuously?
The cable is a passive 10 cm power splitter with no active components, so it adds negligible resistance and no measurable heat during continuous operation.
What header or controller must I already have to plug this DS-0323 Y-cable into?
You need a single 3-pin fan header on the motherboard or a compatible fan controller that supplies standard 3-pin power.
Will the 3-pin connectors on this Y-cable work with older 3-pin LED strips or fans I already own?
Yes, both female ends are standard 3-pin sockets, so any existing 3-pin LED or fan plug will connect directly.
More in Internal PSU & Riser Cables
Similar items
Phobya 6-pin VGA Connector Ver. 1 incl. pins 2ct Male 82379
- Black
- Two sets of Phobya…
Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
Phobya 6-pin VGA connector 2-pack female 82356
- Black
- Two sets of 6-pin f…
Silverstone Technology PP14-PCIE 2x PCIe 8-pin to 12VHPWR internal power cable
- 2x PCIe 8pin female
- 1x 12VHPWR PCIe Gen…
Darkside Computer Modding DS-0819 Molex 4-pin to dual 3-pin Y-cable 12V 30cm Black
- Black
- Simple power Y-cabl…





