Darkside Computer Modding DS-0369 4-Pin Molex internal power cable 4 in
Four-inch 4-pin Molex extension cable connects LED mods to standard power supplies
- Cable length4 in (10.2 cm)
- Universal power extension for flexible LED modding
- 4-inch length reduces cable clutter in custom builds
- Type 5s design connects directly to standard 4-pin Molex
- Enables connector changes without replacing entire LED product
- DarkSide Connect range supports unique system perfection
Power cable for LED modding
The Darkside DS-0369 is a 4-pin Molex extension cable designed for custom computer lighting projects. It connects directly to a standard Molex power connector to feed LED strips or other modding components. The short length keeps wiring tidy inside compact cases. Builders who need a quick power tap for illumination will find it a practical solution.
Replacing fixed LED wiring
This cable replaces the need to solder or permanently attach power leads to each LED module. When a lighting layout changes, the connector swaps out without rewiring the whole run. The jump is worth it for builders who frequently reconfigure their lighting schemes or test different LED types. It is not suited for high-current devices such as drives or GPU auxiliary power.
Fitting into a custom build
The 10 cm length routes easily behind motherboard trays or along cable channels. It frees up space by eliminating excess cable loops that clutter the interior. A Molex branch from the power supply is required to plug it in. The cable adds no active components, so it draws nothing beyond the attached LED load.
How it compares
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
- Price $1.05
- Cheaper than about 99% of the 7,693 comparable items (median $14.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Size & build | |
|---|---|
| Cable length | 4 in (10.2 cm) |
Questions about this item
How much clearance does the 4 in cable need behind the drive cage?
The cable is 4 in (10 cm) long, so allow at least that much straight run from the Molex port to avoid sharp bends.
Which way round does the Type 5s connector seat on a standard 4-pin Molex header?
The keyed 4-pin Molex plug only fits one orientation; push it straight in until the latch clicks — do not force it sideways.
When should I swap this Molex extension if I keep re-routing my LED lighting?
Replace it if the pins feel loose, the insulation shows cracks, or the latch no longer holds the connector firmly.
More in Internal PSU & Riser Cables
Similar items
Darkside Computer Modding CONNECT Pass-Through Cable 4" 3-Pin Type 3s DS-0365
- 4 in (10.2 cm)
Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
Darkside Computer Modding CONNECT 12" 3-Pin Type 1 DS-0322 internal power cable
- 1 ft (0.3 m)
Silverstone Technology PP14-PCIE 2x PCIe 8-pin to 12VHPWR internal power cable
- 2x PCIe 8pin female
- 1x 12VHPWR PCIe Gen…
Darkside Computer Modding CONNECT Cable 4" 3-Pin Type 1s
- 4 in (10.2 cm)





