Darkside Computer Modding DS-0782 RGB LED adapter cable
Adapter cable links DarkSide RGB LEDs to Gigabyte motherboards with on-board RGB headers
- Key featuresAdapter cable to connect the DarkSide RGB LED to the Gigabyt
- Connect DarkSide RGB LEDs to Gigabyte motherboards via on-board RGB header
- Tested on Z170X-DESIGNARE and X99-Ultra Gaming for broad compatibility
- Uses Darkside Modular CONNECT power connector for secure fit
- Simple adapter cable design enables easy RGB lighting integration
- Model DS-0782 ensures correct part identification for your build
DarkSide RGB LED Adapter Cable
This adapter cable connects DarkSide RGB LED devices to Gigabyte motherboards equipped with an on-board RGB header. It uses a Darkside Modular CONNECT power connector for a secure internal link. The part is new and intended for PC builders adding custom lighting.
Who this suits and who should look elsewhere
Builders using DarkSide RGB strips with a compatible Gigabyte board will find this cable a direct fit. It was tested in-house on Z170X-DESIGNARE and X99-Ultra Gaming models and is expected to work on other RGB-enabled Gigabyte boards. Buyers with motherboards from other brands or without an on-board RGB header cannot use this adapter.
Specification that decides fit
The single deciding factor is the presence of a Gigabyte on-board RGB header that matches the Darkside Modular CONNECT interface. Without that specific header the cable cannot connect the LED device. Verify your motherboard header type before purchasing.
How it compares
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
- Price $3.99
- Cheaper than about 96% of the 7,772 comparable items (median $14.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | Darkside |
| Model name | DS-0782 |
Questions about this item
What motherboard header does the DS-0782 adapter cable plug into?
The cable connects to the on-board RGB header found on Gigabyte motherboards.
Which connector on the DarkSide RGB LED module accepts the DS-0782 cable?
The DarkSide Modular CONNECT port on the LED module receives the adapter.
When should the DS-0782 adapter cable be replaced?
Replace it if the connector pins bend, the insulation frays, or the LED strip no longer responds to motherboard control.
More in Internal PSU & Riser Cables
Similar items
Micro Connectors ATX 12V 4-Pin CPU Power Extension Cable 8 Inches
Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
Qinghai Electronics 20-Piece Cable Comb Set — 16×8-pin, 4×24-pin, Silver
- Silver
GELID SOLUTIONS CA-PWM-03 1-to-4 4pin PWM Fan Power Splitter internal power cable
- 1.37 ft (0.42 m)
- Cable Kits
Dimastech BT111 Black & Red Switch Cables 600mm 2-Pin I/O
- 1.97 ft (0.6 m)





