Darkside Computer Modding SATA cable 30 cm 180° Yellow Sand DS-0193
A 30 cm SATA 3.0 data cable with 180° connectors and a yellow-sand sleeve for internal storage drives
- Cable length1 ft (0.3 m)
- SATA 3.0 data transfer supported by 180° connectors
- 30 cm length fits compact builds without excess cable
- Secure latch prevents accidental disconnection during transport
- Yellow Sand sleeve adds a distinctive colour accent
- Quality sleeving protects wires and improves airflow management
Darkside SATA 3.0 30 cm 180° Cable
This 30 cm SATA 3.0 data cable connects storage drives to a motherboard or controller. The Yellow Sand sleeving adds a distinctive look for modders building custom systems. It is intended for enthusiasts who value cable routing aesthetics as much as function. Builders needing longer runs or different connector angles should choose another length.
180° to 180° Connector Orientation
Both ends use a straight 180° connector with a latch for a secure fit. This orientation suits drives mounted parallel to the motherboard tray. If your drive bay or motherboard header requires a 90° angled plug, this cable will not align correctly. The latch helps prevent accidental disconnection during transport or vibration.
Sustained Data Transfer Stability
The cable supports the SATA 3.0 specification for consistent throughput during long file transfers or backups. Quality sleeving protects the internal conductors from EMI and physical wear over time. The fixed 30 cm length minimises signal degradation compared to extended runs. It maintains reliable link speeds without the drops seen in poorly shielded alternatives.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $2.99
- Cheaper than about 95% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Size & build | |
|---|---|
| Cable length | 1 ft (0.3 m) |
Questions about this item
What real-world speed does the SATA 3.0 label deliver when the cable is installed?
The cable supports the SATA 3.0 interface, which caps at 6 Gb/s; actual throughput depends on the drive and controller in your system.
Does the 180° connector orientation limit which motherboard ports or drive bays I can use?
Both ends use straight 180° connectors with latches, so they fit standard SATA ports on motherboards and drives without angular clearance issues.
Will the 30 cm sleeved length reach from a bottom-mounted drive to a top-mounted motherboard port in a mid-tower case?
At 30 cm the cable suits short internal runs; measure your specific routing path to confirm it spans the distance without tension.
More in SATA & eSATA Drive Cables
Similar items
Nippon Labs SATA3L-1.5FT-RD 1.5 ft SATA III cable UV Red
- 1.5 ft (0.46 m)
- SATA III
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
Darkside DS-0966 SATA M/F Extension Cable Jet Black
- Black
- Compliment your bui…
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
Darkside CONNECT SATA Cable Type 16 5-Pin 30cm Black DS-1019
- 1 ft (0.3 m)





