Darkside Computer Modding Type 5 4-Pin Molex 12" internal power cable

Modular LED power extension

The Darkside Computer Modding Type 5 cable adds twelve inches of reach to a standard four-pin Molex connector. It is designed for builders who need to route LED lighting power around tight bends or behind motherboard trays without stretching the stock loom. The universal DarkSide Connect format lets you swap cable types without replacing the LED unit itself. This simplifies cable management in custom systems where neat routing matters.

Molex plug and flexible sleeving

A standard four-pin Molex plug terminates one end, while the other accepts the proprietary DarkSide Connect interface used by the brand's LED products. The twelve-inch length (thirty centimetres) is short enough to avoid excess slack yet long enough to bridge common gaps in mid-tower and larger chassis. Flexible sleeving resists kinking when the cable is folded behind drive cages or along case walls. The plug-and-play design requires no tools or soldering.

Check connector and clearance before buying

Verify that your LED strip or controller uses the DarkSide Connect socket, because Type 5 only mates with that specific interface. Confirm the power supply has a free four-pin Molex header; the cable draws power from that source alone. Measure the routing path inside your case to ensure twelve inches covers the distance without tension. Builders needing longer runs or a different power source should look for alternative lengths or connector types.