Darkside USB Mini-Transformer 12v Dual Fan Adapter Cable 50cm Black DS-1044
Converts USB power to 12 V for two fans via a single 4-pin connector on a 50 cm black cable
- Cable length1.6 ft (0.49 m)
- Powers 12 V fans from any USB port
- Built-in step-up transformer raises voltage to 12 V
- Single 4-pin header fits both 3-pin and 4-pin fans
- 50 cm length suits compact internal routing
- Jet Black sleeving protects wires and looks clean
USB 12 V fan adapter for compact builds
This Darkside cable converts a standard USB port into a 12 V supply for a single cooling fan. The integrated step-up transformer raises the bus voltage so a 12 V fan can run directly from a motherboard header, a power bank or any USB-A socket. It targets builders who need a low-profile cooling solution without a dedicated fan header or external power brick.
50 cm Jet Black sleeved lead with 4-pin fan plug
The half-metre cable ends in a 4-pin connector that accepts both 3-pin and 4-pin fans, while the Jet Black sleeving keeps the run tidy inside small cases. Current is limited by the USB specification: 0.5 A on a 2.0 port and 0.9 A on a 3.0 port, so the adapter only supports fans that stay within those limits.
Check USB port current rating
Verify that the host port can deliver enough amperage for the fan you intend to use; exceeding 0.5 A on USB 2.0 or 0.9 A on USB 3.0 will trigger protection or cause instability. The adapter provides a single fan connection only, so setups requiring multiple fans or higher-startup-current models need a different power source.
How it compares
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
- Price $4.99
- Cheaper than about 95% of the 7,693 comparable items (median $14.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Size & build | |
|---|---|
| Cable length | 1.6 ft (0.49 m) |
Questions about this item
Will the transformer or USB connector degrade if I run two fans continuously at the 0.9 A USB 3.0 limit?
The adapter has no user-serviceable parts; the transformer and USB plug are moulded into the cable, so nothing is designed to be replaced.
What stops me from drawing more than 0.9 A from a USB 3.0 port when both fans spin up?
The host port enforces its 0.9 A ceiling; if combined fan draw exceeds that, the port will throttle or shut down.
Does the transformer get hot or make noise when it up-volts to 12 V all day?
The unit is passive with no fan or moving parts, so it produces no audible noise; warmth will be low at the rated 0.9 A load.
More in Internal PSU & Riser Cables
Similar items
Nippon Labs POW-S6800-6IN 6.1" Molex to 2 x SATA 15-pin internal power cable
- 6.1 in (15.5 cm)
- 1x Molex LP4 male
Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
Micro Connectors ATX 12V 4-Pin CPU Power Extension Cable 8 Inches
Silverstone Technology PP14-PCIE 2x PCIe 8-pin to 12VHPWR internal power cable
- 2x PCIe 8pin female
- 1x 12VHPWR PCIe Gen…
Dimastech BT111 Black & Red Switch Cables 600mm 2-Pin I/O
- 1.97 ft (0.6 m)





