DBTLAP Laptop CPU Cooling Fan for Dell Latitude 13 7340 5V .5A
Replacement CPU cooling fan for Dell Latitude 13 7340 laptops, 5V 0.5A
- Accessory categoryCooler
- Direct replacement for Dell Latitude 13 7340
- Matches part numbers 0D6V6X D6V6X DFS5K12114464C FQ6K
- 5V .5A power rating for correct voltage
- Each unit tested before shipping
- Verify photos and model number for 100% compatibility
Compatible Latitude 13 7340 Cooling Fan
This DBTLAP CPU cooling fan is built as a direct replacement for the Dell Latitude 13 7340. It targets owners of that specific model who need to restore original thermal performance. The part carries identifiers 0D6V6X, D6V6X, DFS5K12114464C, FQ6K and 023.100TH.0021 for exact matching.
Tested Unit With Standard Connector
Each fan is tested before shipping and arrives as a single unit without additional hardware. The 5V 0.5A electrical rating matches the laptop’s header, so the existing connector fits without adapters. Real-item photographs show the exact housing and cable routing you will receive.
Verify Part Numbers Before Ordering
Buyers who cannot confirm the part numbers listed above should not order, as compatibility is limited to the exact Latitude 13 7340 configuration. Cross-reference the codes on your original fan or provide your model number for validation before purchasing.
How it compares
Measured against everything we stock in Laptop Cooling Stands & Fans, at today’s prices. Recalculated every night.
- Price $17.99
- Cheaper than about 58% of the 6,169 comparable items (median $20.99).
Specifications
| Product | |
|---|---|
| Accessory category | Cooler |
Questions about this item
What voltage and current does the 5V .5A fan draw from the Dell Latitude 13 7340 header?
The fan is rated for 5 volts and 0.5 amps, matching the original 0D6V6X or D6V6X part numbers listed for the Latitude 13 7340.
Which screw-hole pattern and connector orientation match the 023.100TH.0021 revision?
The replacement uses the same mounting layout and connector position as the DFS5K12114464C and FQ6K revisions shown in the product photos.
How do I route the cable so the connector seats fully on the motherboard header?
Feed the lead along the chassis channel, align the keyed plug with the 4-pin header, and press straight down until the latch clicks; avoid bending the cable sharply at the solder joints.
More in Laptop Cooling Stands & Fans
Similar items
Cooler Master MNX-SSEK-NNNNN-R1 laptop cooling pad 15" 11.70" x 8.50" x .70
- Notebook Cooler
- Support up to 15-in…
DELL MGK85 laptop lid cover 17" blue for Inspiron 17R N7110
- Skin / Cover
- SWITCH by Design St…
weastlinks RA-2 laptop cooling pad white 2 fans 10 ARGB LEDs 5V 0.21A 3-pin 4-pin 500mm wire 135x50x9mm
- Cooler
- White
Lemincrash MF60070V1-C370-S9A laptop cooling fan
- Cooling Fan & Heats…
- Black/Silver





