DBTLAP server fan for HP ProLiant DL60 GEN9 DL120 GEN9
Replacement server fan compatible with HP ProLiant DL60 and DL120 Gen9 models
- Compatible with HP ProLiant DL60 GEN9 and DL120 GEN9 servers
- Replaces OEM part numbers 768753-001, 779103-001, 778567-001, 790514-001
- Each unit tested individually for 100% working condition
- 9-month warranty included with purchase
- Supplied by Forcecon, ADDA, Sunon, Kipo or equivalent manufacturers
Replacement server fan for ProLiant DL60
This replacement fan fits HP ProLiant DL60 Gen9 and DL120 Gen9 servers using part numbers 768753-001, 779103-001, 778567-001 or 790514-001. It is intended for administrators maintaining these specific rack-mount systems who need a direct swap for a failed or noisy unit. The package contains 1 fan tested before shipment. Buyers who need a different form factor or a fan for another server generation should look elsewhere.
Capacity and headroom: single-fan replacement
The fan serves as a 1-to-1 substitute for the original cooling module in the supported Gen9 chassis. It restores the airflow the system was designed for, but it does not increase the thermal headroom beyond the server's stock specification. If a chassis requires multiple fans to meet its cooling budget, each position must be populated separately. Builders planning a custom enclosure or a higher-density configuration will not find additional performance margin here.
Thermals, noise and power draw in normal use
The unit is sourced from manufacturers such as Forcecon, ADDA, Sunon or Kipo depending on stock, so acoustic profile and power consumption can vary between individual units. Each item is tested to confirm 100 per cent operation before shipping. In normal server operation the fan runs under the system's own fan-control logic, adjusting speed to meet thermal targets. No independent noise or power figures are provided for this replacement part.
How it compares
Measured against everything we stock in Laptop Cooling Stands & Fans, at today’s prices. Recalculated every night.
- Price $17.99
- Cheaper than about 58% of the 6,169 comparable items (median $20.99).
Specifications
No published specifications for this item yet.
Questions about this item
Will the 768753-001 fan fit alongside the existing cooling assembly in my DL60 Gen9 without blocking adjacent slots?
The fan is a direct replacement for part numbers 768753-001, 779103-001, 778567-001 and 790514-001, so it occupies the same mounting points and clearance as the original unit in both DL60 and DL120 Gen9 servers.
How can I verify the fan is spinning at the correct speed after installation?
Each unit is tested before shipping to ensure 100% operation; once installed, check the server iLO or BIOS hardware monitor for fan RPM readings and confirm no thermal alerts appear during POST.
Does the package include mounting screws or a power cable, or must I reuse the originals?
The box contains 1 x fan only; screws, power connectors and any ducting must be reused from the original assembly or sourced separately.
More in Laptop Cooling Stands & Fans
Similar items
Cooler Master MNX-SSEK-NNNNN-R1 laptop cooling pad 15" 11.70" x 8.50" x .70
- Notebook Cooler
- Support up to 15-in…
DELL MGK85 laptop lid cover 17" blue for Inspiron 17R N7110
- Skin / Cover
- SWITCH by Design St…
weastlinks RA-2 laptop cooling pad white 2 fans 10 ARGB LEDs 5V 0.21A 3-pin 4-pin 500mm wire 135x50x9mm
- Cooler
- White
Lemincrash MF60070V1-C370-S9A laptop cooling fan
- Cooling Fan & Heats…
- Black/Silver





