DIXSG 3-pack SATA cable 90° straight to right angle 6Gbps 50cm 18 inch
Three-pack of 50 cm SATA III cables with 90-degree locking connectors for internal drives, supporting 6 Gbps transfer
- Product colorBlack
- 6 Gbps peak bandwidth from SATA 3.0 revision
- 90° right-angle connectors fit tight chassis spaces
- Locking latch on each end prevents accidental disconnects
- Three-cable pack covers RAID arrays or spare drives
- 50 cm / 18 in length reaches most internal bays
Three-cable kit for internal SATA drives
This three-pack supplies straight-to-right-angle SATA III cables for connecting hard drives, SSDs and optical drives to a motherboard or host controller. The 90-degree ends help route cables in tight spaces around drive bays and expansion cards. Each cable includes a locking latch on both connectors to resist vibration. The set suits builders adding multiple drives or configuring a RAID array.
6 Gbps bandwidth with 50 cm reach
Rated to the SATA 3.0 specification, the cables support up to 6 Gbps transfer rates and remain backward compatible with SATA I and SATA II devices. Real-world throughput is limited by the connected drive and controller, not the cable itself. The 50 cm length (approximately 18 inches) reaches most mid-tower drive locations without excess slack. Longer runs or external enclosures would need a different cable.
Shielded conductors and locking latches
Tinned copper cores and aluminium foil shielding reduce electromagnetic interference for reliable data integrity. The integrated locking latch on each connector prevents accidental disconnection during case moves or drive swaps. No software, drivers or additional adapters are included in the package.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $17.99
- Pricier than about 67% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Product color | Black |
Questions about this item
Will these 90-degree cables fit alongside my existing SATA II motherboard ports?
Yes, the cables are backwards compatible with SATA I and SATA II ports while supporting up to 6 Gbps on SATA III.
How can I verify the 6 Gbps link is active after connecting an SSD?
Check the negotiated link speed in your BIOS or OS device manager; it should report 6 Gbps when the drive and controller both support SATA 3.0.
Does the three-pack include power cables or only the 50cm data cables with locking latches?
The pack contains three 50cm SATA data cables with locking latches on both ends; power cables are not included.
More in SATA & eSATA Drive Cables
Similar items
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
Nippon Labs SATA3-1.5FT-BK-10P SATA cable 1.5 ft 10 pack
- 1.5 ft (0.46 m)
- SATA III
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA





