DIXSG SATA Cable III 3-Pack 90° 50cm White
Three-pack of white SATA III cables with 90-degree locking connectors, 50 cm length, supporting 6 Gbps transfer rates
- Product colorWhite
- 6 Gbps maximum throughput with SATA 3.0 support
- 90-degree right-angle connectors fit tight spaces
- Locking latches on both ends prevent accidental disconnects
- Three cables included for multiple drives or RAID
- 50 cm length suits standard chassis layouts
Cable purpose and audience
This three-pack of SATA III cables connects motherboards or host controllers to internal hard drives, SSDs or optical drives. The 90-degree right-angle connectors suit tight spaces behind drive cages or in small chassis. Builders adding multiple drives or configuring RAID arrays benefit from having matching spares in one package.
Sustained transfer behaviour
The cables comply with SATA Revision 3.0 for up to 6 Gbps signalling and are backward compatible with SATA I and II. Actual throughput depends on the drive and controller rather than the cable itself. Shielded tinned-copper conductors with aluminium foil reduce external interference during continuous read or write sessions. Locking latches on both ends keep each connection secure under vibration or case movement.
Installation notes and common issues
Each cable measures 50 cm (18 inches) from connector to connector, limiting reach in full-tower layouts. The right-angle plug orientation is fixed, so verify the port direction on your motherboard before routing. White insulation helps cable tracing but shows dust more visibly than darker colours. Ensure the latch clicks fully; a partial seat can cause intermittent detection.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $15.99
- Pricier than about 60% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Product color | White |
Questions about this item
Does the 90-degree SATA III cable add any heat or noise inside a case that runs all day?
The cable is a passive data link with no active components, so it generates no measurable heat and makes no noise regardless of how long the system runs.
What must the motherboard or controller provide for these cables to work?
Each cable needs a standard SATA data port on the motherboard or host controller; the locking latch secures the connection once the port is present.
Will the 6 Gbps SATA III cables work with older SATA I or SATA II drives I want to keep?
Yes, the cables are backwards compatible with SATA I and SATA II devices, so existing drives will function at their native speeds.
More in SATA & eSATA Drive Cables
Similar items
STARTECH SLSATAADAP6 6-Inch Slimline SATA to SATA Adapter
- 6 in (15.2 cm)
- Others
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
Longdex SATA22PEC-50CM-4 SATA 22-pin female to 7+15-pin male combo extension cable 50cm 4-pack
- Sata, Sata
- SATA
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
ADCAUDX SATA-005 6pcs SATA III 1m 6Gbps Braided Cable Set
- 6 GB/s
- SATA Cables





