APC AP7723 Switched Rackmount PDU 20A 230V 8xC13 1xC19
- cUL Listed, EN 5502…
- Switched
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 1U horizontal PDU with automatic transfer switching between two 120/230 V sources, delivering 3.33 kVA through eight C13 and one C19 outlets
The Eaton EATS220 is a 1U horizontal power distribution unit with an integrated automatic transfer switch. It accepts two independent AC sources and switches between them without interrupting connected equipment. The unit delivers 3.33 kVA through nine locking IEC outlets. It is built for rack environments that cannot tolerate a power loss on the primary feed.
Two NEMA L6-20P plugs and two IEC 320-C20 inlets provide redundant input paths from separate circuits or UPS units. The internal transfer logic monitors both sources and moves the load to the secondary input within milliseconds when the primary deviates. This replaces single-cord PDUs or manual transfer panels where downtime during source failure is unacceptable.
Eight IEC 320-C13 receptacles and one IEC 320-C19 receptacle distribute power to servers, switches and storage arrays. The 3.33 kVA rating supports dense 120 V or 230 V loads up to the rated apparent power. The single C19 outlet limits the number of high-draw devices that can be connected directly without adapter cables.
Measured against everything we stock in Rackmount PDUs, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Eaton |
| Product type | Others |
| Power | |
| Supply voltage | 120 V 230 V |
| Size & build | |
| Product weight | 7.8 lb (3.54 kg) |
| Shipping weight | 5.58 kg |
| Package size | 579 × 381 × 137 mm |
Yes, the 1U horizontal design mounts in a standard 19-inch rack using the included brackets, occupying one rack unit of vertical space.
Connect each input cord to a separate, independent circuit; the common mistake is plugging both cords into the same circuit, which defeats the automatic transfer redundancy.
Eaton recommends a functional test of the automatic transfer switch annually; replace the unit if the self-test fails or after a major surge event.
More in Rackmount PDUs
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?