eMagTech
eMagTech 679-EL 4Pin Floppy Male to 15Pin SATA Female Adapter Cable 22cm 2pcs
Converts a 4-pin floppy power connector to a 15-pin SATA female connector, 22 cm cable, pack of two
- Connector detailsSata
- Connector genderMale-to-Female
- Product typeFloppy, SATA
- Converts 4-pin floppy power to 15-pin SATA power
- 22 cm length suits tight case routing
- Two cables included for spare or dual use
- PVC construction resists wear during repeated swaps
- Designed for floppy drives only, not hard drives
Converts 4-pin floppy power to 15-pin SATA
This adapter cable converts a 4-pin floppy male connector from a power supply into a 15-pin female SATA power connector. It is designed specifically for powering floppy drives and must not be connected to a hard drive. The 22cm length provides flexibility for internal routing. A pack of two cables is included for spare or dual-drive configurations.
Replaces missing SATA power connectors
Use this adapter when a power supply lacks native SATA power leads but retains a 4-pin floppy connector. The jump is worth it when adding a floppy drive or SATA-powered peripheral to an older PSU without replacing the unit. It is not for builders who need to power standard hard drives or SSDs from a floppy rail.
Fits into legacy power supply builds
The male-to-female design plugs directly into the PSU's 4-pin floppy output and accepts a standard SATA power plug. PVC construction ensures durability for long-term use. The short cable keeps clutter low inside the case. It frees up the need for a dedicated SATA power header on the power supply itself.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $18.99
- Pricier than about 70% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | eMagTech |
| Model name | 679-EL |
| Product type | Floppy, SATA |
| Ports & slots | |
| Connector details | Sata |
| Connector gender | Male-to-Female |
Questions about this item
Will the 22cm cable reach my drive from the PSU floppy connector?
The 22cm length adds a short extension from the 4-pin floppy male plug to the 15-pin SATA female socket, so measure that distance inside your case before fitting.
Which side of the 4-pin floppy male plug faces up when inserting it into the PSU?
The keyed 4-pin floppy male connector only seats one way; align the chamfered corners with the PSU socket and press firmly until it clicks.
How often should I replace the two PVC adapter cables in a running system?
Inspect the PVC jacket and both connectors during any hardware change; swap a cable if you see cracked insulation, bent pins or intermittent power to the floppy drive.
More in SATA & eSATA Drive Cables
Similar items
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
CableCreation Mini SAS SFF-8087 to Right Angle SFF-8087 Cable 2.5FT
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
KEHIPI E55 SATA to USB 3.0 Adapter Cable 9 Inches Grey
- Usb a 3.0
- Male-to-Male





