EN-Labs 10 inch SATA III 90 to 180 degree latch cable
A 10-inch SATA III data cable with a 90-to-180-degree angled latch connector for secure drive installation
- Connector count2
- Connector details1 x SATA to 1 x SATA
- Connector genderFemale to Female
- Conductor typeCopper Conductor
- Product typeSATA III
- Overall length6 in - 10 in
- Latch secures drive connection in tight spaces
- 90-to-180-degree angle eases routing in cramped cases
- 10-inch length keeps internal cabling tidy
- 26 AWG tinned copper conductors support 6.0 Gbps SATA III speeds
- UL listed and RoHS compliant for safety and environmental standards
Tight-space SATA cable with latch
This 10 inch SATA III data cable links a 2.5 inch SSD or hard drive to a motherboard or host controller. One end bends 90 degrees and the other sits at 180 degrees, letting the cable hug the board edge in cramped chassis. A latch on the straight connector clicks into place so vibration cannot unseat the link. The cable is rated for 6.0 Gbps and works with older SATA I and II ports.
26 AWG tinned copper with shielding
Each conductor uses 26 AWG tinned copper wrapped in a foil shield to keep the 6 Gbps signal clean inside a busy case. The 7-pin receptacles follow the "L" type key so they only insert one way, preventing bent pins during blind installs. UL listing and RoHS compliance confirm the materials meet baseline safety and environmental standards. The silver jacket resists kinking when routed behind drive cages.
Replaces loose or straight-through cables
Builders who fight cable clutter behind a stacked drive bay gain a firm, angled path that stays seated when the case moves. Technicians carrying a spare can diagnose a flaky drive connection in seconds without hunting for a proprietary angled lead. The jump is worth it when a straight plug blocks a neighbouring port or when a non-latching cable has already popped loose once. Buyers who need longer reach or right-angle-to-right-angle geometry should look elsewhere.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $5.99
- Cheaper than about 90% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Product type | SATA III |
| Design style | 1 Angle |
| Ports & slots | |
| Connector count | 2 |
| Connector details | 1 x SATA to 1 x SATA |
| Connector gender | Female to Female |
| Size & build | |
| Overall length | 6 in - 10 in |
| Cable shielding | Yes |
| Conductor type | Copper Conductor |
Questions about this item
What data rate does the SATA III interface on this cable cap at in practice?
The cable supports SATA revision III up to 6.0 Gbps, but actual throughput is limited by the connected drive and controller.
What clearance does the 90-degree to 180-degree connector layout need to fit inside a case?
One end angles 90 degrees and the other sits straight at 180 degrees, so the right-angle side needs only shallow side clearance while the straight end needs rear depth.
How is the latch released when removing the cable, and what step do people skip?
Press the latch tab on the straight connector before pulling; the common mistake is yanking the cable without releasing the latch, which can damage the port.
More in SATA & eSATA Drive Cables
Similar items
Micro Connectors 4-Pin LP4 to Left Angle SATA Power Adapter Cable 6 Inches
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
Micro Connectors 12" SATA III Straight Cable with Locking Latch Black 3-Pack
- Black
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
Micro Connectors SATA III 20" 90° to 90° Cable with Locking Latch Black 3-Pack
- Black





