EN-Labs 70 cm SATA III 22-pin to 7-pin data + Molex 4-pin combo cable red
A 70 cm SATA III cable combines a 22-pin data-and-power connector with a 7-pin data plug and a Molex 4-pin power feed, supporting 6 Gbps bandwidth for 2.5" and 3.5" drives
- Connector count3
- Connector details1 x SATA to 1 x SATA
- Connector genderMale to Female
- Conductor typeCopper Conductor
- Product typeSATA III
- Overall length26 in - 30 in
- Powers SATA drives from a Molex 4-pin supply without a PSU upgrade
- 70 cm length reaches drives in full-tower cases while supporting 6 Gbps SATA 3.0 bandwidth
- Thin cable design reduces clutter and improves airflow inside the case
- 22-pin SATA connector delivers both data and 12 V / 5 V power to 2.5" and 3.5" drives
- Shielded copper conductors protect signal integrity for reliable transfers
What this cable does
This 70 cm combo cable carries SATA III 6 Gbps data and delivers 12 V and 5 V power to a SATA drive from a Molex 4-pin connector on the power supply. It lets you add a SATA device without upgrading the power supply. The 22-pin source plugs into a backplane or motherboard header, while the 7-pin data and Molex tails reach the drive.
Capacity and headroom
Rated for SATA 3.0 bandwidth, the link handles 3.5-inch and 2.5-inch hard drives or SSDs at full interface speed. The copper conductors and shielding keep the 6 Gbps signal clean over the 70 cm run. A single drive is supported; the cable does not split power or data to multiple devices.
When the upgrade makes sense
Use this cable when your power supply lacks native SATA power connectors but has a free Molex 4-pin lead. It replaces the need for a new power supply or a separate Molex-to-SATA adapter plus a data cable. The combination is not suited for builders who need to power more than one drive from a single Molex connection.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $6.99
- Cheaper than about 85% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Product type | SATA III |
| Ports & slots | |
| Connector count | 3 |
| Connector details | 1 x SATA to 1 x SATA |
| Connector gender | Male to Female |
| Size & build | |
| Overall length | 26 in - 30 in |
| Cable shielding | Yes |
| Conductor type | Copper Conductor |
Questions about this item
Will the 22-pin SATA connector on this cable fit the combined data and power port on my older 2.5" laptop drive?
Yes, the 22-pin SATA connector carries both data and power for 2.5" drives that use the combined interface, while the separate 7-pin data and Molex 4-pin connectors attach to the motherboard and power supply.
How can I confirm the cable is delivering 6 Gbps bandwidth after installation?
Check the drive's reported link speed in the system BIOS or a tool like CrystalDiskInfo; it should show SATA 3.0 at 6 Gbps if the drive and port also support that rate.
Does the 70 cm cable include the Molex 4-pin power connector, or do I need a separate adapter?
The Molex 4-pin connector is integrated into the cable assembly, so no separate adapter is required to draw 12 V and 5 V power from the power supply.
More in SATA & eSATA Drive Cables
Similar items
Nippon Labs SATA3L1.5FT-90/180RD 1.5 ft SATA III cable 90 to 180 degree
- 1.5 ft (0.46 m)
- SATA III
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
Micro Connectors 12 Inches 15-pin SATA Male to Female Power Extension Cable
- 1 ft (0.3 m)
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
Micro Connectors SATA III straight to right-angle cable 20" black 3-pack
- Black





