EN-Labs ADSATA2IDE SATA 15-pin Male to Molex 4-pin LP4 Female internal power cable
Converts a SATA 15-pin power connector to a Molex 4-pin LP4 female plug for IDE hard drives and optical drives
- Connector count2
- Connector genderMale to Female
- Product typePower
- Product colorBlack
- Overall length1 in - 5 in
- DetailsConnector A - SATA Power 15 pin Male Connector B - Molex 4 p
- Connect IDE drives using a SATA power supply
- 15-pin SATA male plugs directly into PSU
- 4-pin LP4 female fits legacy hard drives
- Powers 2.5 and 3.5 inch devices
- 12 V and 5 V rails delivered through adapter
SATA-to-Molex power adapter
This 15-pin SATA male to 4-pin LP4 female cable lets you power an IDE hard drive from a modern SATA power connector. It is intended for builders adding legacy storage to a current ATX or EPS power supply.
Voltage and connector limits
The adapter passes 5 V and 12 V DC through two connectors without active regulation. It supports 2.5 and 3.5 inch IDE hard disks, optical drives and other devices that use the large 4-pin interface.
Simple plug-in installation
Push the SATA male end into the PSU lead and the Molex female onto the drive until both seat firmly. Mis-aligned pins or a loose fit are the typical issues that prevent the drive from spinning up.
How it compares
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
- Price $4.99
- Cheaper than about 95% of the 7,693 comparable items (median $14.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | En-Labs |
| Model name | ADSATA2IDE |
| Product type | Power |
| Product color | Black |
| Ports & slots | |
| Connector count | 2 |
| Connector gender | Male to Female |
| Size & build | |
| Overall length | 1 in - 5 in |
Questions about this item
Should I pick the 1" or the 5" version for a standard ATX case?
The cable length ranges from 1" to 5"; choose the shorter end for tight routing near the PSU or the longer end when the drive bay sits farther away.
What does the 15-pin SATA male actually deliver to my IDE drive?
It carries 5 V and 12 V DC from the PSU through the 15-pin SATA header and presents them on the 4-pin LP4 female so the IDE device receives both voltage rails.
Does the LP4 female end follow the standard Molex pinout for 2.5" and 3.5" drives?
Yes — the 4-pin LP4 female uses the conventional Molex arrangement, so any 2.5" or 3.5" IDE hard drive, optical drive or other large-4P device plugs in directly.
More in Internal PSU & Riser Cables
Similar items
Nippon Labs POW-S6800-6IN 6.1" Molex to 2 x SATA 15-pin internal power cable
- 6.1 in (15.5 cm)
- 1x Molex LP4 male
Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
Micro Connectors ATX 12V 4-Pin CPU Power Extension Cable 8 Inches
Silverstone Technology PP14-PCIE 2x PCIe 8-pin to 12VHPWR internal power cable
- 2x PCIe 8pin female
- 1x 12VHPWR PCIe Gen…
Qinghai Electronics 20-Piece Cable Comb Set — 16×8-pin, 4×24-pin, Silver
- Silver





