Arctic Silver AS5-3.5G thermal paste 3.5g tube
- 3.5g
- -50 to 130 °C
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Pack of 100 conductive silicone thermal pads sized 10x10x2.0 mm with 3.2 W/mK conductivity for GPU, chipset and LED cooling
EN-Labs conductive silicone thermal pads measure 10x10x2.0mm and come in a pack of 100 blue pieces. They are designed to fill gaps between heat sources and heatsinks on components such as GPUs, northbridge chips, LED drivers and other ICs. The pads are soft, malleable and slightly tacky for easy placement.
Thermal conductivity is rated at 3.2 W/m·K with a breakdown voltage above 4kV. The material operates continuously from -40°C to 200°C and provides strong electrical insulation. Tensile strength is 180 kgf/cm². These figures define the heat-transfer capability and electrical safety margin for the intended applications.
The 2.0mm thickness is the critical dimension that must match the gap between your component and its heatsink. A thinner or thicker pad will not make proper contact, reducing cooling effectiveness or causing mechanical stress. Verify the exact gap before purchasing.
Measured against everything we stock in Thermal Paste, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
No published specifications for this item yet.
This listing supplies 100 pads, each 10 mm by 10 mm by 2.0 mm thick, in blue with 3.2 W/m·K conductivity; choose this pack when your gaps match those exact dimensions.
It indicates the pad conducts heat at 3.2 watts per metre-kelvin, so a 2.0 mm layer across a 10 mm square moves heat efficiently while the silicone stays flexible from -40 °C to 200 °C.
The material is described as conductive silicone yet provides strong insulation with a breakdown voltage above 4 kV, so it fills gaps without shorting nearby circuitry.
More in Thermal Paste
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?