EN-Labs JACKET-SATA3-18RD90 18 inch 90 to 180 degree SATA cable red sleeved
18-inch SATA III cable with 90-to-180-degree angled connectors, locking latches and red braided sleeve for tidy internal routing
- Cable length1.5 ft (0.46 m)
- Connector count2
- Connector details1 x SATA to 1 x SATA
- Connector genderFemale to Female
- Conductor typeCopper Conductor
- Product typeSATA III
- 6 Gbps SATA III throughput for fast drive performance
- 90° to 180° connectors simplify routing in tight cases
- Locking latches on both ends prevent accidental disconnection
- 26 AWG tinned copper with shielding ensures signal integrity
- Red braided nylon jacket adds durability and a clean look
EN-Labs JACKET-SATA3-18RD90 18 inch cable
This SATA III data cable connects motherboards and host controllers to internal hard drives and optical drives. It supports up to 6.0 Gbps throughput and remains backwards compatible with SATA I and II ports. The 18 inch length suits standard chassis layouts.
Red braided nylon jacket
A high quality nylon fiber sleeve protects 26AWG tinned copper conductors and adds flexibility for routing. One end features a 90 degree latching receptacle while the other uses a straight 180 degree latching design. Both locking latches prevent accidental disconnection during transport or vibration.
Replaces loose or non locking SATA cables in tight
The angled connector eases cable management where straight plugs foul drive cages or expansion cards. Builders who need longer reach or a different angle configuration should choose another length or orientation. The UL listed and RoHS compliant construction meets baseline safety and environmental requirements.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $6.99
- Cheaper than about 85% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | En-Labs |
| Model name | JACKET-SATA3-18RD90 |
| Product type | SATA III |
| Ports & slots | |
| Connector count | 2 |
| Connector details | 1 x SATA to 1 x SATA |
| Connector gender | Female to Female |
| Size & build | |
| Overall length | 16 in - 20 in |
| Cable length | 1.5 ft (0.46 m) |
| Cable shielding | Yes |
| Conductor type | Copper Conductor |
Questions about this item
What speed does the SATA III 6 Gbps interface actually deliver with this cable?
The cable supports SATA revision 3.0 up to 6.0 Gbps, but the real throughput is limited by the drive and controller you connect.
What clearance does the 90-degree connector need to fit beside a motherboard port?
The 90-degree "L" type key connector bends the cable parallel to the board, so it fits in tight spaces where a straight plug would hit adjacent components.
How do I seat the locking latch so the cable does not work loose?
Push each 7-pin connector straight in until the latch clicks; forcing it at an angle can bend the pins and prevent the lock from engaging.
More in SATA & eSATA Drive Cables
Similar items
Nippon Labs SATA3L1.5FT-90/180RD 1.5 ft SATA III cable 90 to 180 degree
- 1.5 ft (0.46 m)
- SATA III
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
Micro Connectors 12 Inches 15-pin SATA Male to Female Power Extension Cable
- 1 ft (0.3 m)
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
Micro Connectors SATA III straight to right-angle cable 20" black 3-pack
- Black





