EN-Labs LP423TX425CM Molex to 3×4-pin fan power splitter cable 10 in black sleeved
Splits one Molex connector into three 4-pin fan headers for 12 V power only, 10 in black sleeved cable
- Cable length10 in (25.4 cm)
- First connectorMolex IDE 4pin
- Second connector3 × 4pin fan male (2pin tips)
- Connector count4
- Product typeFan power splitter cable
- Product colorBlack
- Powers three fans from one Molex connector
- Black sleeved 10-inch cable keeps build tidy
- 12 V output only — no PWM speed control
- 2-wire fan headers fit 3-pin and 4-pin plugs
- Single Molex to triple 4-pin splitter expands cooling options
Molex-to-three-fan splitter
The EN-Labs LP423TX425CM cable splits a single 4-pin Molex connector from a power supply into three 4-pin fan headers. It is built for system builders who need to run multiple case or CPU cooler fans from one PSU lead. The black sleeved wiring keeps the loom tidy inside the chassis. Each output header uses only two wires to deliver 12 V DC power.
Three fans at fixed 12 V
The adapter powers up to three fans simultaneously at a constant 12 volts. Because the connectors carry only power pins, the motherboard cannot regulate speed through PWM or monitor RPM feedback. Fans will run at full speed unless they have their own internal controller. The 10 inch length suits typical mid-tower routing from PSU to fan cluster.
Passive operation and no speed control
No active electronics are present, so the cable adds no audible noise or measurable heat of its own. Power draw equals the combined current of the attached fans, limited by the Molex source and the 2-wire 12 V design. Builders who need variable fan curves should use motherboard headers instead of this fixed-voltage splitter.
How it compares
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
- Price $4.99
- Cheaper than about 95% of the 7,693 comparable items (median $14.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | EN-Lab |
| Model name | LP423TX425CM |
| Product type | Fan power splitter cable |
| Product color | Black |
| Ports & slots | |
| First connector | Molex IDE 4pin |
| Second connector | 3 × 4pin fan male (2pin tips) |
| Connector count | 4 |
| Size & build | |
| Overall length | 10 in / 25CM |
| Cable length | 10 in (25.4 cm) |
Questions about this item
Will the 4-pin Molex connector on this LP423TX425CM cable fit the older power supply I am keeping?
Yes, the cable uses a standard 4-pin Molex IDE connector that plugs into any ATX power supply with a matching Molex output.
How can I confirm the splitter is delivering power to all three fans after I install it?
Connect each fan to the three 4-pin headers; if all fans spin at full speed on 12 V DC, the splitter is working as intended.
Does the 10-inch sleeved cable include the three case fans or only the adapter?
Only the Molex-to-three-fan splitter cable is included; the fans themselves must be purchased separately.
More in Internal PSU & Riser Cables
Similar items
Nippon Labs POW-S6800-6IN 6.1" Molex to 2 x SATA 15-pin internal power cable
- 6.1 in (15.5 cm)
- 1x Molex LP4 male
Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
Micro Connectors ATX 12V 4-Pin CPU Power Extension Cable 8 Inches
Silverstone Technology PP14-PCIE 2x PCIe 8-pin to 12VHPWR internal power cable
- 2x PCIe 8pin female
- 1x 12VHPWR PCIe Gen…
Qinghai Electronics 20-Piece Cable Comb Set — 16×8-pin, 4×24-pin, Silver
- Silver





