EN-Labs SATA cable 24" 90° to 180° locking UV Red
A 24-inch SATA III data cable with a 90-degree to 180-degree angled latch connector for secure internal drive connections at up to 6.0 Gbps
- Cable length24 in (61 cm)
- Connector count2
- Connector details1 x SATA to 1 x SATA
- Connector genderFemale to Female
- Conductor typeCopper Conductor
- Product typeSATA III
- 90° to 180° angled connectors ease routing in tight cases
- Locking latch on straight end secures connection against vibration
- SATA III 6.0 Gbps support handles modern SSD speeds
- 26 AWG tinned copper conductors with shielding protect signal integrity
- 24 inch length fits standard drive-to-motherboard runs
24-inch SATA III data cable with latch
This 24-inch SATA III cable connects 2.5-inch SSDs and 3.5-inch hard drives to motherboard ports or host controllers. One end is a 90-degree receptacle and the other is a straight 180-degree connector, both with 7-pin keyed sockets. The straight end includes a latch that clicks into place for a secure fit in tight drive cages. Shielded 26 AWG tinned copper conductors carry the signal.
Suits builds needing a right-angle drive connection
The right-angle plug keeps the cable close to the drive PCB, useful in cramped enclosures or behind backplanes where a straight plug would foul the side panel. It is not for external eSATA brackets or hot-swap bays that require a shielded bulkhead connector. Buyers who need a straight-to-straight layout or a longer run for full-tower routing should look at a different cable.
6 Gbps SATA III signalling
The cable is rated for SATA revision III at 6.0 Gbps and is backwards compatible with SATA I and II ports. Actual throughput is limited by the slowest device in the link, so a SATA II drive or port will operate at its native speed.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $5.99
- Cheaper than about 90% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Product type | SATA III |
| Design style | 1 Angle |
| Ports & slots | |
| Connector count | 2 |
| Connector details | 1 x SATA to 1 x SATA |
| Connector gender | Female to Female |
| Size & build | |
| Overall length | 21 in - 25 in |
| Cable length | 24 in (61 cm) |
| Cable shielding | Yes |
| Conductor type | Copper Conductor |
Questions about this item
How much space does the 90-degree connector need behind a 2.5-inch SSD?
The right-angle end adds about 24 mm beyond the drive's SATA port, so allow at least 25 mm between the drive and the case wall or adjacent card.
Which end should I plug in first when the straight connector has a latch?
Insert the 90-degree end into the drive, then press the straight latch end into the motherboard until it clicks; forcing the latch end first often bends the key.
When should I replace this cable if transfer speeds drop?
Swap it if the latch no longer holds, the 26 AWG conductors show kinks, or the UV-red jacket cracks near the 90-degree bend after repeated routing.
More in SATA & eSATA Drive Cables
Similar items
Micro Connectors 4-Pin LP4 to Left Angle SATA Power Adapter Cable 6 Inches
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
Micro Connectors 12" SATA III Straight Cable with Locking Latch Black 3-Pack
- Black
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
Micro Connectors SATA III 20" 90° to 90° Cable with Locking Latch Black 3-Pack
- Black





