EN-Labs SATA cable 6" 90° to 180° locking silver
Six-inch SATA III data cable with a 90-degree to 180-degree angled latch for secure connections in tight spaces
- Connector count2
- Connector details1 x SATA to 1 x SATA
- Connector genderFemale to Female
- Conductor typeCopper Conductor
- Cable length6 in (15.2 cm)
- Product typeSATA III
- Locking latch keeps the cable firmly seated in tight cases
- 90° to 180° routing avoids sharp bends behind drives
- 0 Gbps bandwidth handles SATA III SSD speeds
- 26 AWG tinned copper conductors resist signal loss
- UL listed and RoHS compliant for safe builds
6-inch SATA III locking cable
The EN-Labs SATA cable measures six inches and carries a 90-degree plug on one end and a straight 180-degree plug on the other. Both connectors are 7-pin SATA receptacles with a locking latch for a firm seat. It is built with 26AWG tinned copper conductors and shielded for signal integrity.
Replaces loose or short SATA leads
Use this cable when an existing data lead is too long, unsecured, or lacks a locking tab. The right-angle connector fits tight drive bays or crowded motherboard headers where a straight plug would foul adjacent components. The jump is worth it whenever cable routing or vibration makes a standard lead unreliable.
Handles SATA III 6.0 Gbps links
The cable supports the full 6.0 Gbps throughput of SATA III and remains backward compatible with SATA I and II ports. Actual transfer speed is limited by the drive and controller attached. It is not suited for external eSATA runs or for bridging longer distances inside full-tower chassis.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $5.99
- Cheaper than about 90% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Product type | SATA III |
| Design style | 1 Angle |
| Ports & slots | |
| Connector count | 2 |
| Connector details | 1 x SATA to 1 x SATA |
| Connector gender | Female to Female |
| Size & build | |
| Overall length | 6 in - 10 in |
| Cable shielding | Yes |
| Conductor type | Copper Conductor |
| Cable length | 6 in (15.2 cm) |
Questions about this item
How much clearance does the 90-degree connector need behind the drive?
The 90-degree plug extends sideways from the drive port, so allow roughly the connector height plus cable bend radius behind the device.
Which end should I latch first when routing the 6-inch cable in a tight case?
Attach the straight 180-degree end with its latch to the motherboard first, then connect the 90-degree end to the drive.
When should I replace this 26AWG SATA III cable?
Replace it if the latch no longer clicks, the conductors show kinks, or you experience intermittent 6.0 Gbps link errors.
More in SATA & eSATA Drive Cables
Similar items
Micro Connectors 4-Pin LP4 to Left Angle SATA Power Adapter Cable 6 Inches
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
Micro Connectors 12" SATA III Straight Cable with Locking Latch Black 3-Pack
- Black
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
Micro Connectors SATA III 20" 90° to 90° Cable with Locking Latch Black 3-Pack
- Black





