EN-Labs SATA cable 6" 90° to 180° locking UV Green
A 6-inch SATA III cable with a 90° to 180° locking connector for drives in tight spaces
- Connector count2
- Connector details1 x SATA to 1 x SATA
- Connector genderFemale to Female
- Conductor typeCopper Conductor
- Cable length6 in (15.2 cm)
- Product typeSATA III
- Locking latch prevents accidental disconnection in tight builds
- 90° to 180° angled connectors fit cramped drive bays
- 6 Gbps SATA III bandwidth supports modern SSDs and HDDs
- 26 AWG tinned copper conductors with shielding ensure signal integrity
- UL listed and RoHS compliant for safety and environmental standards
Connection geometry
This 6-inch SATA cable links a drive to a motherboard or host controller using a 90-degree connector on one end and a straight 180-degree connector on the other. The short length suits cramped drive bays or back-to-back drive cages where a longer cable would obstruct airflow. It is built for internal storage upgrades or IT troubleshooting kits.
SATA III throughput ceiling
The cable supports the SATA revision III interface up to 6.0 Gbps and remains backwards compatible with SATA I and II ports. Actual transfer speed is limited by the rating of the attached drive and controller, so a SATA III SSD will not exceed its own specification even with this cable. No protocol conversion or signal amplification is performed.
Latching and shielding
A latch on the straight connector secures the connection against vibration or accidental dislodgement during transport or case maintenance. The 26AWG tinned copper conductors are shielded to reduce electromagnetic interference inside a dense chassis. UL listed and RoHS compliant materials meet common safety and environmental standards for internal wiring.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $6.99
- Cheaper than about 85% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Product type | SATA III |
| Design style | 1 Angle |
| Ports & slots | |
| Connector count | 2 |
| Connector details | 1 x SATA to 1 x SATA |
| Connector gender | Female to Female |
| Size & build | |
| Overall length | 6 in - 10 in |
| Cable shielding | Yes |
| Conductor type | Copper Conductor |
| Cable length | 6 in (15.2 cm) |
Questions about this item
Should I pick the 90° or 180° end for my drive?
The cable has a 90° connector on one side and a 180° connector on the other; choose the orientation that fits your drive bay and motherboard layout.
Will the 6.0 Gbps rating give me that speed on my SSD?
The cable supports up to 6.0 Gbps, but actual throughput is limited by the drive and controller you connect.
Does the SATA III interface work with older SATA ports?
Yes, the cable is backwards compatible with SATA I and II ports while still supporting the 6 Gbps specification.
More in SATA & eSATA Drive Cables
Similar items
Nippon Labs SATA3L1.5FT-90/180RD 1.5 ft SATA III cable 90 to 180 degree
- 1.5 ft (0.46 m)
- SATA III
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
Micro Connectors 12 Inches 15-pin SATA Male to Female Power Extension Cable
- 1 ft (0.3 m)
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
Micro Connectors SATA III straight to right-angle cable 20" black 3-pack
- Black





