EN-Labs SATA cable 90° to 180° latch 6" UV Red
A 6-inch SATA III cable with a 90-degree to 180-degree latch design for secure drive connections in tight spaces
- Connector count2
- Connector details1 x SATA to 1 x SATA
- Connector genderFemale to Female
- Conductor typeCopper Conductor
- Cable length6 in (15.2 cm)
- Product typeSATA III
- Latching 90° connector secures drives in tight cases
- 180° straight end fits standard motherboard ports cleanly
- 6 Gbps SATA III throughput matches modern SSD speeds
- 26 AWG tinned copper conductors resist signal loss
- UL listed and RoHS compliant for safe builds
Cable geometry and data rate
This 6-inch SATA III cable carries one 90-degree connector and one straight 180-degree connector, each with a 7-pin latching receptacle. It supports the SATA 6 Gbps revision and remains compatible with earlier SATA I and II ports. Shielded 26 AWG tinned copper conductors handle the signal.
Builders with tight routing versus open layouts
The mixed-angle design helps route the cable behind drive cages or along motherboard edges where a straight plug would collide with other components. Builders who prefer a single straight run or need a longer reach for full-tower cases should consider a different length or angle combination.
Signal integrity under continuous transfer
The UL-listed, RoHS-compliant shielding and tinned copper conductors maintain the rated 6 Gbps link during sustained reads and writes without the signal degradation sometimes seen on unshielded ribbon cables. The locking latch prevents accidental disconnection when vibration or thermal expansion shifts the drive slightly.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $6.99
- Cheaper than about 85% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Product type | SATA III |
| Design style | 1 Angle |
| Ports & slots | |
| Connector count | 2 |
| Connector details | 1 x SATA to 1 x SATA |
| Connector gender | Female to Female |
| Size & build | |
| Overall length | 6 in - 10 in |
| Cable shielding | Yes |
| Conductor type | Copper Conductor |
| Cable length | 6 in (15.2 cm) |
Questions about this item
What must my motherboard provide for this 7-pin SATA cable to work?
Your motherboard needs a free 7-pin SATA data port; the cable plugs straight in with no extra power or adapter required.
Will the 90-degree to 180-degree latch cable work with my older SATA I and II drives?
Yes, the cable is backwards compatible with SATA I and II ports while still supporting up to 6.0 Gbps on SATA III devices.
How can I confirm the 26AWG copper cable is running at the expected 6.0 Gbps link speed?
Check the negotiated link rate in your BIOS or OS storage utility; it should report 6 Gbps when both drive and controller are SATA III.
More in SATA & eSATA Drive Cables
Similar items
Nippon Labs SATA3L1.5FT-90/180RD 1.5 ft SATA III cable 90 to 180 degree
- 1.5 ft (0.46 m)
- SATA III
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
Micro Connectors 12 Inches 15-pin SATA Male to Female Power Extension Cable
- 1 ft (0.3 m)
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
Micro Connectors SATA III straight to right-angle cable 20" black 3-pack
- Black





