EN-Labs SATA cable 90° to 180° locking 6 inch black
Six-inch SATA III cable with 90° to 180° angled locking connectors for tight internal drive bays
- Rated speed6 Gbit/s
- Cable length6 in (15.2 cm)
- Connector count2
- Connector details1 x SATA to 1 x SATA
- Connector genderFemale to Female
- Conductor typeCopper Conductor
- 6 Gbps throughput via SATA 3.0 specification
- 90-degree to 180-degree angle eases tight-space routing
- Locking latches on both ends prevent accidental disconnection
- 26 AWG tinned copper conductors with shielding
- UL listed and RoHS compliant construction
90° to 180° locking SATA cable for tight builds
This 6-inch SATA cable connects a motherboard or host controller to an internal hard drive or SSD. One end bends at 90 degrees and the other runs straight at 180 degrees, helping route the cable cleanly in cramped cases. A locking latch on each connector prevents accidental disconnection. It is suited for builders who need a short, secure link in a confined chassis.
Replaces loose or straight cables that block airflow
The angled ends let the cable hug the motherboard and drive without looping across other components. Builders upgrading from non-latching cables gain a firm click that resists vibration. The jump is worth it when the drive sits close to the board edge or when a graphics card overhangs the SATA ports, making straight connectors hard to seat or remove.
Sustains 6.0 Gbps throughput
Tinned copper wires and full shielding keep signal integrity stable during long file transfers or continuous drive activity. The cable meets SATA revision 3.0 electrical limits and is backward compatible with earlier SATA ports. Actual speed is limited by the attached drive and controller, not by the cable itself. UL listed and RoHS compliant materials maintain performance over extended use.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $7.99
- Cheaper than about 80% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | En-Labs |
| Model name | SATA6BK90 |
| Product type | Cable Connectors |
| Performance | |
| Rated speed | 6 Gbit/s |
| Ports & slots | |
| Connector count | 2 |
| Connector details | 1 x SATA to 1 x SATA |
| Connector gender | Female to Female |
| Size & build | |
| Overall length | 6 in - 10 in |
| Cable length | 6 in (15.2 cm) |
| Cable shielding | Yes |
| Conductor type | Copper Conductor |
Questions about this item
Will the 90-degree connector clear my motherboard's SATA port if it sits near a 24-pin power plug?
The 90-degree end bends away from the board, so it fits in tight corners where a straight connector would hit the 24-pin plug.
Do I press straight down or slide the latch to seat the locking connector?
Align the L-key, push straight in until the metal latch clicks, then tug gently to confirm it holds.
When should I replace this 26AWG cable if transfer rates drop?
Swap it if the latch tabs crack, the conductors kink near the bend, or errors persist after reseating both ends.
More in SATA & eSATA Drive Cables
Similar items
Micro Connectors SATA cable 40 inches straight to right angle locking latch black 3 pack
- Black
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
Micro Connectors 23" 1-to-4 15-Pin SATA Power Splitter Cable
- SATA
- Black
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
Micro Connectors 0.5 m SATA III Right Angle to Right Angle Data Cable 3-Pack Red
- Red





