EN-Labs SATA III 10 inch Locking Cable UV Green
A 10-inch SATA III data cable with locking latch connectors for secure drive connections up to 6.0 Gbps
- Connector count2
- Connector details1 x SATA to 1 x SATA
- Connector genderFemale to Female
- Conductor typeCopper Conductor
- Product typeSATA III
- Overall length6 in - 10 in
- Secure latch prevents accidental disconnects
- 10-inch length fits tight drive bays cleanly
- 26AWG tinned copper conductors ensure reliable signal
- 0 Gbps SATA III throughput for fast transfers
- UL listed and RoHS compliant for safety
10-inch SATA III locking cable
This 10-inch SATA III cable carries a 6.0 Gbps rating and uses 26AWG tinned copper conductors with shielding. The 180-degree latching connectors lock into drive and motherboard ports for a secure fit in tight spaces. It is UL listed and RoHS compliant.
Replaces loose or non-latching SATA leads
The locking latch prevents accidental disconnects that can occur with standard friction-fit cables during drive swaps or case moves. Backwards compatibility with SATA I and II ports means it works in older systems without a controller upgrade. The jump is worth it when cable routing leaves no room for a wide grip.
Sustained throughput at the rated 6.0 Gbps
Shielded 26AWG conductors maintain signal integrity over the full 10-inch run under continuous read and write loads. Actual transfer speed remains limited by the attached drive and controller rather than the cable itself. The latch keeps the connection stable during prolonged heavy I/O.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $6.99
- Cheaper than about 85% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Product type | SATA III |
| Design style | Straight |
| Ports & slots | |
| Connector count | 2 |
| Connector details | 1 x SATA to 1 x SATA |
| Connector gender | Female to Female |
| Size & build | |
| Overall length | 6 in - 10 in |
| Cable shielding | Yes |
| Conductor type | Copper Conductor |
Questions about this item
Will the 10 inch cable reach between my motherboard and drive cage?
The cable measures 10 inches end to end, so measure the routing path inside your case before ordering.
How do I engage the latch on the 7-pin SATA 180 degree connector?
Push the straight connector straight in until the latch clicks; do not angle it or the latch will not seat.
When should I replace this 26AWG tinned copper cable?
Replace it if the latch no longer holds, the jacket shows kinks, or you experience intermittent drive detection.
More in SATA & eSATA Drive Cables
Similar items
Nippon Labs SATA3L1.5FT-90/180RD 1.5 ft SATA III cable 90 to 180 degree
- 1.5 ft (0.46 m)
- SATA III
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
Micro Connectors 12 Inches 15-pin SATA Male to Female Power Extension Cable
- 1 ft (0.3 m)
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
Micro Connectors SATA III straight to right-angle cable 20" black 3-pack
- Black





