EN-Labs SATA III 18 inch locking cable UV Red
An 18-inch SATA III data cable with locking latches for secure drive connections, supporting 6.0 Gbps speeds and backward compatibility
- Cable length18 in (45.7 cm)
- Connector count2
- Connector details1 x SATA to 1 x SATA
- Connector genderFemale to Female
- Conductor typeCopper Conductor
- Product typeSATA III
- Secure latch prevents accidental disconnects
- 18 inch length fits standard drive bays
- 0 Gbps SATA III speed supports modern SSDs
- 26AWG tinned copper conductors with shielding
- UL listed and RoHS compliant materials
What this cable does
The EN-Labs SATA III cable carries data at up to 6.0 Gbps between a motherboard or host controller and a 2.5 or 3.5 inch drive. Its 18 inch length suits typical desktop chassis and the UV red jacket aids cable identification in a busy build.
What to verify first
Confirm your drive and motherboard both present a standard 7 pin SATA data port. The straight 180 degree latching connectors require a few millimetres of clearance behind the port, so check that adjacent components or a snug drive cage will not block insertion.
Build and daily use
Shielded 26 AWG tinned copper conductors resist signal degradation and the UL listed, RoHS compliant jacket meets baseline safety and environmental standards. The integrated latch clicks home to prevent accidental disconnection during transport or vibration, yet releases with a simple thumb press when you need to swap drives.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $5.99
- Cheaper than about 90% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Product type | SATA III |
| Design style | Straight |
| Ports & slots | |
| Connector count | 2 |
| Connector details | 1 x SATA to 1 x SATA |
| Connector gender | Female to Female |
| Size & build | |
| Overall length | 16 in - 20 in |
| Cable length | 18 in (45.7 cm) |
| Cable shielding | Yes |
| Conductor type | Copper Conductor |
Questions about this item
Does the 18 inch SATA III cable include both connectors or must I buy a second one?
The package contains one cable with a 7-pin latching SATA connector on each end, so no extra connectors are needed.
Should I pick the 16, 18 or 20 inch length for a mid-tower case?
The cable is supplied at 18 inches; the 16 to 20 inch range in the spec simply reflects manufacturing tolerance.
What does the 6.0 Gbps headline speed mean when the cable is fitted to a SATA III motherboard and SSD?
It supports the SATA III 6 Gbps specification; actual throughput will match the slowest device on the link.
More in SATA & eSATA Drive Cables
Similar items
Micro Connectors 4-Pin LP4 to Left Angle SATA Power Adapter Cable 6 Inches
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
Micro Connectors 12" SATA III Straight Cable with Locking Latch Black 3-Pack
- Black
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
Micro Connectors SATA III 20" 90° to 90° Cable with Locking Latch Black 3-Pack
- Black





