EN-Labs SATA III 18" Locking Cable UV Green
18-inch SATA III data cable with locking latch supports 6.0 Gbps speeds for secure drive connections
- Cable length18 in (45.7 cm)
- Connector count2
- Connector details1 x SATA to 1 x SATA
- Connector genderFemale to Female
- Conductor typeCopper Conductor
- Product typeSATA III
- 6 Gbps SATA III speed for fast data transfer
- Locking latch prevents accidental disconnection during use
- 18 inch length fits most internal drive bays
- 26AWG tinned copper conductors with shielding for signal integrity
- UL listed and RoHS compliant for safety standards
What the cable does and who needs it
This 18-inch SATA III data cable links a 7-pin SATA drive to a motherboard or host controller at up to 6.0 Gbps. It serves IT technicians who keep a spare for troubleshooting and DIY builders adding storage to a desktop system.
Check your ports and clearance first
Verify that both the drive and the host have standard 7-pin SATA ports and that an 18-inch straight run reaches between them without strain. The latching receptacles need a clear line of insertion; angled or low-profile headers may block the latch from engaging fully.
Build quality and daily implications
The cable uses 26 AWG tinned copper conductors with shielding and carries UL listing plus RoHS compliance. Straight 180-degree latching connectors lock in place to resist vibration, while the UV green jacket aids cable identification inside a crowded chassis.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $5.99
- Cheaper than about 90% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Product type | SATA III |
| Design style | Straight |
| Ports & slots | |
| Connector count | 2 |
| Connector details | 1 x SATA to 1 x SATA |
| Connector gender | Female to Female |
| Size & build | |
| Overall length | 16 in - 20 in |
| Cable length | 18 in (45.7 cm) |
| Cable shielding | Yes |
| Conductor type | Copper Conductor |
Questions about this item
Does the 18 inch cable come with any extra brackets or screws, or is it just the cable?
The package contains one 18 inch SATA III data cable with latching connectors; no brackets, screws or additional accessories are included.
Should I pick the 18 inch version or a different length for a standard ATX case?
The 18 inch length fits most internal drive-to-motherboard runs in ATX builds; choose a shorter or longer cable only if your routing path is unusually tight or spans the full case depth.
Will the 6.0 Gbps rating actually give me that speed on my SATA III SSD?
The cable supports up to 6.0 Gbps, but the real transfer rate is limited by the drive and controller you connect; with a SATA III SSD on a SATA III port you will reach the interface maximum.
More in SATA & eSATA Drive Cables
Similar items
Micro Connectors 4-Pin LP4 to Left Angle SATA Power Adapter Cable 6 Inches
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
Micro Connectors 12" SATA III Straight Cable with Locking Latch Black 3-Pack
- Black
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
Micro Connectors SATA III 20" 90° to 90° Cable with Locking Latch Black 3-Pack
- Black





