EN-Labs SATA III 6 Gbps cable 10 inch latch Silver
10-inch SATA III cable with locking latch delivers 6 Gbps data transfer for HDDs and SSDs
- Connector count2
- Connector details1 x SATA to 1 x SATA
- Connector genderFemale to Female
- Conductor typeCopper Conductor
- Product typeSATA III
- Overall length6 in - 10 in
- Secure latch keeps the 10-inch cable firmly seated
- 0 Gbps SATA III bandwidth for fast drive transfers
- Backwards compatible with SATA I and II ports
- 26 AWG tinned copper conductors with shielding
- UL listed and RoHS compliant for safety
SATA III data cable with latch
This 10-inch SATA III cable connects SATA drives to motherboards or host controllers. It uses 26AWG tinned copper conductors and includes shielding for signal integrity. The straight connectors feature a latch for secure attachment in tight spaces. It is UL listed and RoHS compliant.
Locking 7-pin SATA connector
Each end has a 7-pin SATA 180-degree latching receptacle that locks into place. This prevents accidental disconnection during drive swaps or case movement. The latch works with standard SATA ports on drives and boards. No tool is required to engage or release it.
Sustained 6 Gbps transfer capability
The cable supports SATA revision III speeds up to 6.0 Gbps under continuous load. Backward compatibility with SATA I and II ports is maintained. Actual throughput depends on the connected drive and controller performance. The construction resists signal degradation over extended use.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $5.99
- Cheaper than about 90% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Product type | SATA III |
| Design style | Straight |
| Ports & slots | |
| Connector count | 2 |
| Connector details | 1 x SATA to 1 x SATA |
| Connector gender | Female to Female |
| Size & build | |
| Overall length | 6 in - 10 in |
| Cable shielding | Yes |
| Conductor type | Copper Conductor |
Questions about this item
What speed will I actually see from the 6 Gbps rating inside my PC?
The 6 Gbps ceiling is the SATA III interface limit; real throughput depends on the drive and controller you attach, so a SATA SSD will hit its rated sequential speed while a mechanical drive will be slower.
Does the SATA III connector work with older SATA ports on my motherboard?
Yes, the cable is backward compatible with SATA I and II ports, though the link will run at the slower port's maximum rate.
Will the 10 inch latch cable reach my drive in a standard ATX case?
The 10 inch length suits short runs such as a drive mounted directly behind the motherboard tray or in a 2.5 inch bay near the SATA headers.
More in SATA & eSATA Drive Cables
Similar items
Micro Connectors 4-Pin LP4 to Left Angle SATA Power Adapter Cable 6 Inches
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
Micro Connectors 12" SATA III Straight Cable with Locking Latch Black 3-Pack
- Black
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
Micro Connectors SATA III 20" 90° to 90° Cable with Locking Latch Black 3-Pack
- Black





