EN-Labs SATA III cable 10 inch 90 to 180 degree UV Green
A 10-inch SATA III data cable with a 90-to-180-degree angled connector and locking latch for secure drive connections
- Connector count2
- Connector details1 x SATA to 1 x SATA
- Connector genderFemale to Female
- Conductor typeCopper Conductor
- Product typeSATA III
- Overall length6 in - 10 in
- 6 Gbps throughput for fast drive performance
- 10-inch length with 90-to-180-degree angle fits tight builds
- Latching connector secures the link under vibration
- 26 AWG tinned copper conductors with shielding protect signal integrity
- UL listed and RoHS compliant for regulated environments
Cable purpose and audience
The EN-Labs SATA III cable links a hard drive or SSD to a motherboard or host controller. It suits system builders who need a short internal link and technicians who keep a spare for troubleshooting storage connections.
Signal integrity and shielding
The 10 inch cable uses 26AWG tinned copper conductors with shielding to support 6.0 Gbps SATA III speeds. Backwards compatibility with SATA I and II ports means it works in older systems without signal degradation.
Connector angles and latch
One end bends 90 degrees and the other runs straight at 180 degrees, letting the cable fit around tight drive bays or crowded headers. The straight connector includes a latch that locks in place so vibration does not loosen the connection.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $6.99
- Cheaper than about 85% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Product type | SATA III |
| Design style | 1 Angle |
| Ports & slots | |
| Connector count | 2 |
| Connector details | 1 x SATA to 1 x SATA |
| Connector gender | Female to Female |
| Size & build | |
| Overall length | 6 in - 10 in |
| Cable shielding | Yes |
| Conductor type | Copper Conductor |
Questions about this item
How do I install the 90-degree connector on a tight SATA port?
Align the L-key notch on the 90-degree plug with the port key, push straight in until the latch clicks, then route the cable toward the 180-degree end to avoid bending the 26AWG conductors sharply.
Will the latch or cable need replacement after repeated drive swaps?
The latch is moulded into the straight 180-degree connector and rated for normal installation cycles; the 26AWG tinned copper conductors and shielding are UL listed and RoHS compliant, so no scheduled replacement is required.
What limits sustained transfer speed on this 10-inch cable?
The cable supports SATA III up to 6.0 Gbps, but actual sustained throughput is capped by the slowest attached device — drive, controller or port — not by the 10-inch length or 26AWG conductors.
More in SATA & eSATA Drive Cables
Similar items
Nippon Labs SATA3L1.5FT-90/180RD 1.5 ft SATA III cable 90 to 180 degree
- 1.5 ft (0.46 m)
- SATA III
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
Micro Connectors 12 Inches 15-pin SATA Male to Female Power Extension Cable
- 1 ft (0.3 m)
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
Micro Connectors SATA III straight to right-angle cable 20" black 3-pack
- Black





