EN-Labs SATA III cable 18 inch 90 to 180 degree UV Red
An 18-inch SATA III data cable with a 90-to-180-degree angled connector, latch lock, shielded 26 AWG copper conductors and 6.0 Gbps support
- Cable length18 in (45.7 cm)
- Connector count2
- Connector details1 x SATA to 1 x SATA
- Connector genderFemale to Female
- Conductor typeCopper Conductor
- Product typeSATA III
- 18 inch length fits tight drive bays
- 90 to 180 degree connectors ease routing
- Latching straight end secures the link
- 0 Gbps SATA III speed supported
- UL listed and RoHS compliant build
SATA III cable with angled connectors
The EN-Labs cable carries SATA III signals at up to 6.0 Gbps and remains compatible with SATA I and II ports. It uses 26 AWG tinned copper conductors with shielding to protect data integrity. One end is a 90 degree latch connector, the other a straight 180 degree latch connector, both 7 pin L type key receptacles.
Suits tight drive bays and troubleshooting kits
Builders working in compact cases or stacked drive cages benefit from the mixed angle layout that routes cleanly around obstacles. The latch on each end prevents accidental disconnection during transport or vibration. Buyers who need a straight through cable or a different length should look elsewhere.
Sustained throughput matches host and drive limits
Transfer speed is capped by the slowest connected device rather than the cable itself. Shielded copper construction maintains signal quality over the 18 inch run during long copy sessions. UL listed and RoHS compliant materials meet standard safety and environmental requirements.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $5.99
- Cheaper than about 90% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Product type | SATA III |
| Design style | 1 Angle |
| Ports & slots | |
| Connector count | 2 |
| Connector details | 1 x SATA to 1 x SATA |
| Connector gender | Female to Female |
| Size & build | |
| Overall length | 16 in - 20 in |
| Cable length | 18 in (45.7 cm) |
| Cable shielding | Yes |
| Conductor type | Copper Conductor |
Questions about this item
What motherboard or host controller port does this cable plug into?
One end has a straight 180-degree 7-pin SATA connector with a latch that locks into any standard internal SATA port on a motherboard or host controller.
Will this cable run at full speed with a SATA II hard drive I already own?
The cable is backwards compatible with SATA I and II ports, so a legacy drive will connect and operate at its own rated speed.
How can I confirm the link is running at 6 Gbps after installation?
Check the negotiated link speed in the system BIOS or with a tool such as CrystalDiskInfo; it should show SATA 6 Gbps when both drive and port support SATA III.
More in SATA & eSATA Drive Cables
Similar items
Micro Connectors 4-Pin LP4 to Left Angle SATA Power Adapter Cable 6 Inches
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
Micro Connectors 12" SATA III Straight Cable with Locking Latch Black 3-Pack
- Black
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
Micro Connectors SATA III 20" 90° to 90° Cable with Locking Latch Black 3-Pack
- Black





