EN-Labs SATA10UVBL 10 inch SATA III cable UV Blue
A 10-inch SATA III cable with latching connectors supports 6.0 Gbps transfers and fits tight spaces
- Connector count2
- Connector details1 x SATA to 1 x SATA
- Connector genderFemale to Female
- Conductor typeCopper Conductor
- Product typeSATA III
- Overall length6 in - 10 in
- 6 Gbps data rate for fast storage transfers
- 10 inch length fits compact builds cleanly
- Latching connectors prevent accidental disconnects
- 26 AWG tinned copper with shielding ensures signal integrity
- Backwards compatible with SATA I and II ports
EN-Labs SATA III 10 inch cable
This 10 inch SATA III data cable connects hard drives or SSDs to a motherboard or host controller. It uses 26AWG tinned copper conductors and supports up to 6.0 Gbps transfer speed. The cable is UL listed and RoHS compliant for safety and environmental standards.
180 degree latching connectors
Builders working in tight cases benefit from the straight 180 degree latch design that secures the connection. The cable is backwards compatible with SATA I and II ports for older drives. Users needing angled connectors or longer runs for full-tower layouts should look elsewhere.
10 inch length and 6 Gbps headroom
The short length keeps cable routing tidy while delivering full SATA III bandwidth for solid-state drives. Mechanical hard drives will not saturate the 6 Gbps link in typical use. Very long cable runs or external enclosures requiring eSATA are not supported by this cable.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $5.99
- Cheaper than about 90% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | En-Labs |
| Model name | SATA10UVBL |
| Product type | SATA III |
| Design style | Straight |
| Ports & slots | |
| Connector count | 2 |
| Connector details | 1 x SATA to 1 x SATA |
| Connector gender | Female to Female |
| Size & build | |
| Overall length | 6 in - 10 in |
| Cable shielding | Yes |
| Conductor type | Copper Conductor |
Questions about this item
What motherboard or host-controller port is required for this 10-inch SATA III cable to work?
A standard 7-pin SATA port on the motherboard or host controller is needed; the cable’s straight 180-degree latching connectors plug directly into that port.
Will this cable run at full speed with a SATA II hard drive I already own?
Yes, the cable is backwards compatible with SATA I and II ports, so the older drive will operate at its own rated speed.
How can I verify the link is running at 6.0 Gbps after I connect the cable?
Check the negotiated link speed in the BIOS or OS storage utility; it should report 6 Gbps when both the drive and port support SATA III.
More in SATA & eSATA Drive Cables
Similar items
Micro Connectors 4-Pin LP4 to Left Angle SATA Power Adapter Cable 6 Inches
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
Micro Connectors 12" SATA III Straight Cable with Locking Latch Black 3-Pack
- Black
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
Micro Connectors SATA III 20" 90° to 90° Cable with Locking Latch Black 3-Pack
- Black





