EN-Labs SATA182PK SATA cable 2 pack 18 in straight 90 degree locking
A two-pack of 18-inch SATA III cables — one straight, one 90-degree — each with a locking latch for secure 6 Gbps storage connections
- Cable length1.5 ft (0.46 m)
- Connector count2
- Product typeSATA Data Cable
- Product colorBlack
- Overall length18 in (45.7 cm)
- DetailsTwo SATA data cables are compatible with all SATA connectors
- Fast 6 Gbps transfers with SATA III support
- Locking latches prevent accidental cable disconnection
- 90-degree angled cable fits tight drive bays
- Straight cable suits standard motherboard layouts
- Two 18-inch cables cover multiple drives
Two-cable SATA bundle
This pack supplies two 18-inch SATA III data cables for connecting hard drives, solid-state drives or optical drives. One cable has straight connectors on both ends while the other adds a 90-degree angled plug for tight routing. Both support the 6 Gbps SATA III standard and remain compatible with earlier SATA revisions.
Passive thermals and power
The cables carry only low-voltage signalling, so they add no measurable heat or acoustic load to the system. No external power is required and the thin black sheath keeps airflow unrestricted around other components. Locking metal latches on each connector prevent accidental unplugging during routine maintenance.
Straight and angled connectors
The straight cable suits open drive bays while the right-angle version eases insertion behind motherboards or in cramped chassis corners. Both 18-inch lengths reach typical internal drive locations without excess slack. The pair covers the two most common internal routing scenarios in a single purchase.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $5.99
- Cheaper than about 90% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | EN-Lab |
| Model name | SATA182PK |
| Product type | SATA Data Cable |
| Product color | Black |
| Ports & slots | |
| Connector count | 2 |
| Size & build | |
| Overall length | 18 in (45.7 cm) |
| Cable length | 1.5 ft (0.46 m) |
Questions about this item
How do I install the straight and 90-degree SATA cables and what step do people often miss?
Plug each SATA III male connector into the drive and motherboard ports until the metal locking latch clicks; the step people miss is pressing the latch release before pulling the cable out.
What maintenance or replacement will these SATA cables need later?
No scheduled maintenance is required; replace a cable only if the locking latch breaks or the connector pins become bent.
What limit appears first under sustained use with these SATA III 6 Gbps cables?
The practical throughput limit is the 6 Gbps SATA III interface, which the drive or controller will reach before the cable itself becomes a bottleneck.
More in SATA & eSATA Drive Cables
Similar items
Micro Connectors 4-Pin LP4 to Left Angle SATA Power Adapter Cable 6 Inches
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
Micro Connectors 12" SATA III Straight Cable with Locking Latch Black 3-Pack
- Black
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
Micro Connectors SATA III 20" 90° to 90° Cable with Locking Latch Black 3-Pack
- Black





