EN-Labs SATA18UVGN-3PACK 3-pack 18 inch SATA cable
Three 18-inch SATA III data cables with locking latches and 26 AWG copper conductors for secure 6.0 Gbps drive connections
- Rated speedTest Value
- Cable length1.5 ft (0.46 m)
- Connector count2
- Connector details1 x SATA to 1 x SATA
- Connector genderFemale to Female
- Conductor typeCopper Conductor
Color Translucent Green
- Three cables included for multiple drive installs
- 18 inch length fits compact chassis layouts
- Locking latch on each connector prevents accidental disconnects
- 26 AWG tinned copper conductors with shielding support 6.0 Gbps transfer
- Backwards compatible with SATA I and II ports
Straight-latch SATA III cables for internal drives
This three-pack supplies 18-inch SATA III data cables with 7-pin straight connectors that lock in place. Each cable uses 26AWG tinned copper conductors and supports the 6.0 Gbps SATA revision III standard while remaining backwards compatible with SATA I and II ports.
Replaces loose or non-latching SATA leads
The latch prevents accidental disconnection in tight drive bays or during transport. The jump is worth it when a current cable lacks a locking mechanism, shows signal errors at 6 Gbps, or is too short to reach a motherboard header from a lower drive cage.
Suits builders adding multiple drives
Technicians who troubleshoot storage connections and DIY users expanding internal storage will find the three-cable pack convenient. Buyers who need right-angle connectors, longer runs beyond 18 inches, or external eSATA shielding should look at other cable types.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $6.99
- Cheaper than about 85% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | En-Labs |
| Model name | SATA18UVGN-3PACK |
| Product type | Cable Kits |
| Product color | Translucent Green |
| Design style | 2 Port |
| Performance | |
| Rated speed | Test Value |
| Ports & slots | |
| Connector count | 2 |
| Connector details | 1 x SATA to 1 x SATA |
| Connector gender | Female to Female |
| Size & build | |
| Overall length | 1.5 ft (0.46 m) |
| Cable length | 1.5 ft (0.46 m) |
| Cable shielding | Yes |
| Conductor type | Copper Conductor |
| Compatibility | |
| Supported platforms | Works with Windows Vista |
Questions about this item
How much clearance does the 180-degree straight connector need?
The 180-degree straight connectors require enough space for a 18-inch cable run plus the latch mechanism to engage without bending the 26AWG conductors sharply.
How do I engage the latch correctly on the 7-pin SATA connector?
Push the connector straight onto the port until the latch clicks into the L-type key slot; the common mistake is angling the plug, which prevents the latch from seating.
When should I replace one of these cables in a troubleshooting kit?
Replace a cable if the latch no longer holds, the translucent green jacket shows kinks, or the 26AWG tinned copper conductors become intermittent during drive swaps.
More in SATA & eSATA Drive Cables
Similar items
Nippon Labs SATA3L1.5FT-90/180RD 1.5 ft SATA III cable 90 to 180 degree
- 1.5 ft (0.46 m)
- SATA III
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
Micro Connectors 12 Inches 15-pin SATA Male to Female Power Extension Cable
- 1 ft (0.3 m)
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
Micro Connectors SATA III straight to right-angle cable 20" black 3-pack
- Black





